HardLabs

HockeyHelmetHeadphonesLeft

Colden-Rother·Hockey-Jamz-Open-Source-Modern-Bluetooth-Headphones-for-Hockey-Helmets·PCB-HockeyHelmetHeadphonesLeft/HockeyHelmetHeadphonesLeft.kicad_pcb

HockeyHelmetHeadphonesLeft PCB layout, top view — open source board by Colden-Rother

About the HockeyHelmetHeadphonesLeft PCB

HockeyHelmetHeadphonesLeft is an open source PCB design by Colden-Rother, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 60.8 × 58 mm, with 35 components from 23 distinct parts.

Other key parts include the MICROCHIP_BM83 and MCP111T-300E/TT. By type, the board carries 13 capacitors, 9 resistors, 3 connectors, 3 switches, 3 diodes and 2 ICs.

It belongs with the audio and iot & wireless designs in this gallery.

From the project

Open Source PCB and software for modern bluetooth headphones. This specific design was for hockey helmets, but this easily could be used to just make normal headphones or a custom headset. This project gives full part list as well as how to program the device. Working and Tested Project!

By: Colden Rother, Nathaniel Olsen, and Owen Cunningham

Feel free to email us with any questions you may have regarding this project, this is a very large project and you may have additional questions.

Custom Bluetooth stereo headphones designed to fit inside a hockey helmet. The project uses separate left- and right-ear PCBs, a Microchip BM83 Bluetooth audio module, two helmet-mounted speakers, an onboard digital microphone, media-control buttons, USB-C power/charging, and custom 3D-printable housings.

HockeyHelmetHeadphonesLeft, from the project README
From the project README

Main components on the HockeyHelmetHeadphonesLeft

MICROCHIP_BM83MCP111T-300E/TT

HockeyHelmetHeadphonesLeft bill of materials (BOM)

35 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MICROCHIP_BM83
Microchip_BM83
U101
1
MCP111T-300E/TT
U102
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x04_Pin
J2
1
903250012
J3
1
Speaker
LS1
1
SPH0641LU4H-1
MK101
1
SW_DPDT_X2
SW_DPDT_x2
SW1
2
SW_MEC_5G
SW103, SW104
1
LED_Blue
D101
1
LED_Red
D102
1
LED_Green
D103
6
0.1U
0.1u
C104, C105, C113, C115, C116, C117
2
0.1u
C106, C109
2
10u
C107, C108
1
10U
10u
C114
2
15P
15p
C118, C119
1
15
R7
2
51
R101, R105
1
4.7K
4.7k
R104
Show 3 more
QtyPartRefs
1
470
R106
2
22
R107, R108
2
5.1K
5.1k
R109, R110

HockeyHelmetHeadphonesLeft design files

The KiCad project lives in the Colden-Rother/Hockey-Jamz-Open-Source-Modern-Bluetooth-Headphones-for-Hockey-Helmets repository on GitHub; these links point at the commit this page was built from.

HockeyHelmetHeadphonesLeft: common questions

How big is the HockeyHelmetHeadphonesLeft PCB?

The HockeyHelmetHeadphonesLeft measures 60.8 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HockeyHelmetHeadphonesLeft?

35 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HockeyHelmetHeadphonesLeft design files?

From the Colden-Rother/Hockey-Jamz-Open-Source-Modern-Bluetooth-Headphones-for-Hockey-Helmets repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HockeyHelmetHeadphonesLeft design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in Hockey-Jamz-Open-Source-Modern-Bluetooth-Headphones-for-Hockey-Helmets

Similar boards