3 open source boards using the Microchip_BM83
Real designs built with the Microchip_BM83, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Pocketsequencer
northernpaws
77 × 98 mm62 parts6LCustom license0RP2040/RP2350
BT Audio Player
MAGG4444
77.5 × 85.5 mm61 parts2LNo license0HockeyHelmetHeadphonesLeft
Colden-Rother
60.8 × 58 mm35 parts2LCC-BY-NC-4.00
The Microchip_BM83 in open source designs
The gallery holds 3 open source boards using the Microchip_BM83 from 3 GitHub repositories; a typical one measures about 77 × 85.5 mm and carries around 61 components.
67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Pocketsequencer by northernpaws.
Parts used alongside the Microchip_BM83
Microcontrollers on boards using the Microchip_BM83
What boards using the Microchip_BM83 are built for
Microchip_BM83: common questions
Where can I find a Microchip_BM83 reference design?
Each of the 3 boards on this page is a real design using the Microchip_BM83. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Microchip_BM83 use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the Microchip_BM83?
The median is 77 × 85.5 mm, and 67% are two-layer designs.
What is the most popular open source board using the Microchip_BM83?
By GitHub stars, Pocketsequencer by northernpaws, with 0 stars.
Can I simulate one of these boards using the Microchip_BM83 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.