Saintcon2019TopBoard
About the Saintcon2019TopBoard PCB
Saintcon2019TopBoard is an open source FPGA PCB design by compukidmike, published on GitHub. It is a 4-layer board measuring 148.3 × 147.3 mm, with 1112 components from 14 distinct parts.
Its main chip is the ICE40HX1K-TQ144, from the FPGA family. Other key parts include the AP2112K-3.3TRG1, MIC5504-1.2YM5, MBI5124GP-A and SIL2301-TP. By type, the board carries 1025 diodes, 32 resistors, 31 capacitors, 23 ICs and 1 connector.
It belongs with the wearables designs in this gallery.
From the project
There is also a video of my badge talk at Saintcon https://www.youtube.com/watch?v=MAhJ2W_oN14
There is also a video of my badge talk at Saintcon https://www.youtube.com/watch?v=MAhJ2W_oN14
You will need the STM32CubeProgrammer software from https://www.st.com/en/development-tools/stm32cubeprog.html to reprogram your badge. It's cross-platform, though I've only tested it on Windows 10. Unfortunately ST requires you to create a login to download software :(
Main components on the Saintcon2019TopBoard
Saintcon2019TopBoard bill of materials (BOM)
1112 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICE40HX1K-TQ144 Lattice | TQFP-144_20x20mm_Pitch0.5mm | U1 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 Diodes Incorporated | SOT-23-5 | U2 |
| 1 | MIC5504-1.2YM5 Microchip | SOT-23-5 | U3 |
| 12 | MBI5124GP-A 16BitLEDShiftReg Macroblock | SSOP-24_3.9x8.7mm_Pitch0.635mm | U5, U6, U7, U8, U9, U10, U11, U12 +4 |
| 8 | SIL2301-TP SIL2301 Micro Commercial Co | SOT-23-6 | U17, U18, U19, U20, U21, U22, U23, U24 |
| 1 | 10132798-022100LF Conn_02x10_Counter_Clockwise Amphenol ICC (FCI) | BergStak_20Pin_0.5mm_Male_2.7mm | J1 |
| 1024 | LSTN-B28JEGBB LED_ARGB Lite-On | LTSN-B28JEGBB | D1, D2, D3, D4, D5, D6, D7, D8 +1016 |
| 1 | BAS70JFILM D STMicroelectronics | D_SOD-323 | D1025 |
| 26 | 0.1uF | C_0603 | C1, C2, C3, C4, C5, C6, C7, C8 +18 |
| 1 | 10uF | C_0603 | C9 |
| 4 | 1uF | C_0603 | C11, C12, C13, C14 |
| 3 | 10k | R_0603 | R1, R2, R3 |
| 1 | 100 | R_0603 | R4 |
| 28 | 1K | R_0603 | R9, R10, R11, R12, R13, R14, R15, R16 +20 |
Saintcon2019TopBoard design files
The KiCad project lives in the compukidmike/Saintcon2019 repository on GitHub; these links point at the commit this page was built from.
Saintcon2019TopBoard: common questions
What microcontroller does the Saintcon2019TopBoard use?
The Saintcon2019TopBoard is built around the ICE40HX1K-TQ144, from the FPGA family.
How big is the Saintcon2019TopBoard PCB?
The Saintcon2019TopBoard measures 148.3 × 147.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Saintcon2019TopBoard?
1112 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Saintcon2019TopBoard design files?
From the compukidmike/Saintcon2019 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Saintcon2019TopBoard design in my own project?
The repository has no license, so all rights stay with compukidmike. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Saintcon2019TopBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
More boards in Saintcon2019
Similar boards
FPGABase board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2k
FPGAThunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3k
FPGAIcepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1828
FPGARadioberry
pa3gsb
65 × 56 mm143 parts4LNo license675
FPGAHaasoscopePro
drandyhaas
224.5 × 160 mm586 parts10LMIT471
FPGAFomu hardware
im-tomu
90 × 50 mm57 parts2LCC-BY-SA-4.0235