HardLabs

SaintconMinibadgeDisplay10x10

compukidmike·Saintcon2019·Hardware/KiCad Files/SaintconMinibadgeDisplay10x10/SaintconMinibadgeDisplay10x10.kicad_pcb

SaintconMinibadgeDisplay10x10 PCB layout, top view — open source FPGA board by compukidmike

About the SaintconMinibadgeDisplay10x10 PCB

SaintconMinibadgeDisplay10x10 is an open source FPGA PCB design by compukidmike, published on GitHub. It is a 2-layer board measuring 264.2 × 264.2 mm, with 132 components from 10 distinct parts.

Its main chip is the ICE40HX1K-TQ144, from the FPGA family. Other key parts include the AP2112K-3.3TRG1, MIC5504-1.2YM5, SAINTCON-Minibadge, MBI5124GP-A and SIL2301-TP. By type, the board carries 110 ICs, 20 capacitors, 1 connector and 1 switch.

It belongs with the wearables designs in this gallery.

From the project

There is also a video of my badge talk at Saintcon https://www.youtube.com/watch?v=MAhJ2W_oN14

There is also a video of my badge talk at Saintcon https://www.youtube.com/watch?v=MAhJ2W_oN14

You will need the STM32CubeProgrammer software from https://www.st.com/en/development-tools/stm32cubeprog.html to reprogram your badge. It's cross-platform, though I've only tested it on Windows 10. Unfortunately ST requires you to create a login to download software :(

Main components on the SaintconMinibadgeDisplay10x10

ICE40HX1K-TQ144AP2112K-3.3TRG1MIC5504-1.2YM5SAINTCON-MinibadgeMBI5124GP-ASIL2301-TPAZ1117-3.3

SaintconMinibadgeDisplay10x10 bill of materials (BOM)

132 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ICE40HX1K-TQ144
SAINTCON-Minibadge
Lattice
U1
1
AP2112K-3.3TRG1
SAINTCON-Minibadge
Diodes Incorporated
U2
1
MIC5504-1.2YM5
SAINTCON-Minibadge
Microchip
U3
77
SAINTCON-Minibadge
U4, U25, U26, U27, U28, U29, U30, U31 +69
12
MBI5124GP-A
SAINTCON-Minibadge
Macroblock
U5, U6, U7, U8, U9, U10, U11, U12 +4
8
SIL2301-TP
SAINTCON-Minibadge
Micro Commercial Co
U17, U18, U19, U20, U21, U22, U23, U24
10
AZ1117-3.3
U101, U102, U103, U104, U105, U106, U107, U108 +2
1
USB_B_Micro
J2
1
SW_DPDT_x2
SW1
20
10uF
C1, C2, C3, C4, C5, C6, C7, C8 +12

SaintconMinibadgeDisplay10x10 design files

The KiCad project lives in the compukidmike/Saintcon2019 repository on GitHub; these links point at the commit this page was built from.

SaintconMinibadgeDisplay10x10: common questions

What microcontroller does the SaintconMinibadgeDisplay10x10 use?

The SaintconMinibadgeDisplay10x10 is built around the ICE40HX1K-TQ144, from the FPGA family.

How big is the SaintconMinibadgeDisplay10x10 PCB?

The SaintconMinibadgeDisplay10x10 measures 264.2 × 264.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SaintconMinibadgeDisplay10x10?

132 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SaintconMinibadgeDisplay10x10 design files?

From the compukidmike/Saintcon2019 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the SaintconMinibadgeDisplay10x10 design in my own project?

The repository has no license, so all rights stay with compukidmike. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SaintconMinibadgeDisplay10x10 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

More boards in Saintcon2019

Similar boards