HardLabs

SaintconMinibadgeHolder8

compukidmike·Saintcon2019·Hardware/KiCad Files/SaintconMinibadgeHolder8/SaintconMinibadgeHolder8.kicad_pcb

SaintconMinibadgeHolder8 PCB layout, top view — open source FPGA board by compukidmike
Simulate this board

About the SaintconMinibadgeHolder8 PCB

SaintconMinibadgeHolder8 is an open source FPGA PCB design by compukidmike, published on GitHub. It is a 2-layer board measuring 94 × 61 mm, with 23 components from 7 distinct parts.

Its main chip is the ICE40HX1K-TQ144, from the FPGA family. Other key parts include the AP2112K-3.3TRG1. By type, the board carries 11 jumpers, 8 connectors, 2 ICs and 2 crystals.

It belongs with the wearables designs in this gallery.

From the project

There is also a video of my badge talk at Saintcon https://www.youtube.com/watch?v=MAhJ2W_oN14

There is also a video of my badge talk at Saintcon https://www.youtube.com/watch?v=MAhJ2W_oN14

You will need the STM32CubeProgrammer software from https://www.st.com/en/development-tools/stm32cubeprog.html to reprogram your badge. It's cross-platform, though I've only tested it on Windows 10. Unfortunately ST requires you to create a login to download software :(

Main components on the SaintconMinibadgeHolder8

ICE40HX1K-TQ144AP2112K-3.3TRG1

SaintconMinibadgeHolder8 bill of materials (BOM)

23 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ICE40HX1K-TQ144
TCA9534
Lattice
U1
1
AP2112K-3.3TRG1
TBD62083A
Diodes Incorporated
U2
2
Conn_02x10_Odd_Even
X1, X2
1
10132798-022100LF
SAINTCON-Minibadge
Amphenol ICC (FCI)
J1
7
SAINTCON-Minibadge
J2, J3, J4, J5, J6, J7, J8
8
SolderJumper_2_Open
JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8
3
SolderJumper_3_Open
JP9, JP10, JP11

SaintconMinibadgeHolder8 design files

The KiCad project lives in the compukidmike/Saintcon2019 repository on GitHub; these links point at the commit this page was built from.

SaintconMinibadgeHolder8: common questions

What microcontroller does the SaintconMinibadgeHolder8 use?

The SaintconMinibadgeHolder8 is built around the ICE40HX1K-TQ144, from the FPGA family.

How big is the SaintconMinibadgeHolder8 PCB?

The SaintconMinibadgeHolder8 measures 94 × 61 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SaintconMinibadgeHolder8?

23 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SaintconMinibadgeHolder8 design files?

From the compukidmike/Saintcon2019 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the SaintconMinibadgeHolder8 design in my own project?

The repository has no license, so all rights stay with compukidmike. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SaintconMinibadgeHolder8 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

More boards in Saintcon2019

Similar boards