Modular-Boat-Beacon-Light
computersandrew·Modular-Boat-Beacon-Light
About the Modular-Boat-Beacon-Light PCB
Modular-Boat-Beacon-Light is an open source PCB design by computersandrew, published on GitHub. It is a 2-layer board measuring 75 × 127 mm, with 40 components from 16 distinct parts.
Other key parts include the MCP73831-2-OT and DW01A. By type, the board carries 18 resistors, 13 diodes, 3 capacitors, 2 ICs, 1 transistor and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
Beacon for Bow (soon stern) for Navigational/Safety purposes when traversing waterways
A rebuild of the RowKraft Beacon, a small red/green nav light for rowing shells. The original board is from 2012 (RowKraft LLC). I'm redesigning it in KiCad with a few upgrades because I can, (mostly I can't afford 55 dollars):
- 18650 cell in a PCB holder instead of the old 1000 mAh pouch cell - Battery protection on the board (DW01A + FS8205A) - USB-C charging instead of USB-B (Big '26) - Its own current-limiting resistor for each of the 12 LEDs (6 red, 6 green)

Main components on the Modular-Boat-Beacon-Light
Modular-Boat-Beacon-Light bill of materials (BOM)
40 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831-2-OT | SOT-23-5 | U1 |
| 1 | DW01A | SOT-23-6 | U2 |
| 1 | FS8205A | SOT-23-6L_TCP | Q1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J1 |
| 1 | Battery | BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | SW_SPDT | V-152-1C25 | SW1 |
| 13 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +5 |
| 2 | 4.7 µF | C_0805_2012Metric | C1, C2 |
| 1 | 0.1 µF | C_0805_2012Metric | C3 |
| 6 | 82 | R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 6 | 33 | R_0805_2012Metric | R7, R8, R9, R10, R11, R12 |
| 1 | 2k | R_0805_2012Metric | R13 |
| 1 | 470 | R_0805_2012Metric | R14 |
| 2 | 5.1k | R_0805_2012Metric | R15, R16 |
| 1 | 100 | R_0805_2012Metric | R17 |
| 1 | 1k | R_0805_2012Metric | R18 |
Modular-Boat-Beacon-Light design files
The KiCad project lives in the computersandrew/Modular-Boat-Beacon-Light repository on GitHub; these links point at the commit this page was built from.
- LayoutRPI Beacon.kicad_pcb
- SchematicRPI Beacon.kicad_sch
- BOMREADME.md
Modular-Boat-Beacon-Light: common questions
How big is the Modular-Boat-Beacon-Light PCB?
The Modular-Boat-Beacon-Light measures 75 × 127 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Modular-Boat-Beacon-Light?
40 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Modular-Boat-Beacon-Light design files?
From the computersandrew/Modular-Boat-Beacon-Light repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Modular-Boat-Beacon-Light design in my own project?
The repository has no license, so all rights stay with computersandrew. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k