HardLabs

Tix clock

connorslade·tix-clock·hardware/tix-clock.kicad_pcb

Tix clock PCB layout, top view — open source ESP32 board by connorslade

About the Tix clock PCB

Tix clock is an open source ESP32 PCB design by connorslade, published on GitHub. It is a 2-layer board measuring 139 × 40 mm, with 50 components from 13 distinct parts.

Its main chip is the ESP32-C6-WROOM-1-N8, from the ESP32 family. Other key parts include the AP63203WU-7. By type, the board carries 27 diodes, 7 resistors, 6 transistors, 5 capacitors, 2 ICs and 2 connectors.

Tix clock, from the project README
From the project README

Main components on the Tix clock

AP63203WU-7ESP32-C6-WROOM-1-N8

Tix clock bill of materials (BOM)

50 components, 13 distinct parts.

QtyPartRefs
1
AP63203WU-7
U1
1
ESP32-C6-WROOM-1-N8
U3
6
SS8050
Q1, Q2, Q3, Q4, Q5, Q6
1
Conn_02x03_Counter_Clockwise
J1
1
Conn_01x02
J3
27
LED
D1, D2, D3, D4, D5, D6, D7, D8 +19
1
3.9μH
L1
1
1μf
C1
1
10μf
C2
1
100nf
C3
2
22μf
C4, C5
2
10kΩ
R1, R8
5
130Ω
R3, R4, R5, R6, R7

Tix clock design files

The KiCad project lives in the connorslade/tix-clock repository on GitHub; these links point at the commit this page was built from.

Tix clock: common questions

What microcontroller does the Tix clock use?

The Tix clock is built around the ESP32-C6-WROOM-1-N8, from the ESP32 family.

How big is the Tix clock PCB?

The Tix clock measures 139 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tix clock?

50 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tix clock design files?

From the connorslade/tix-clock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tix clock design in my own project?

The repository has no license, so all rights stay with connorslade. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Tix clock without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards