Windlink

connorslade·windlink·hardware/windlink.kicad_pcb

Windlink PCB layout, top view — open source ESP32 board by connorslade

About the Windlink PCB

Windlink is an open source ESP32 PCB design by connorslade, published on GitHub. It is a 2-layer board measuring 36 × 26 mm, with 20 components from 15 distinct parts.

Its main chip is the ESP32-C6-MINI-1/U, from the ESP32 family. Other key parts include the AP63203WU-7, PTCAN3413DR and BY25FQ64ESWIG(R). By type, the board carries 8 capacitors, 4 ICs, 3 resistors, 1 connector, 1 fuse and 1 LED.

It belongs with the iot & wireless designs in this gallery.

From the project

NMEA 2000 compatible wireless interface

Main components on the Windlink

AP63203WU-7PTCAN3413DRESP32-C6-MINI-1/UBY25FQ64ESWIG(R)

Windlink bill of materials (BOM)

20 components, 15 distinct parts.

QtyPartRefs
1
AP63203WU-7
U1
1
PTCAN3413DR
U2
1
ESP32-C6-MINI-1/U
U3
1
BY25FQ64ESWIG(R)
U4
1
M12A-05PMMR-SF7003
J1
1
0ZCJ0050AF2E
F1
1
LTST-C170KFKT
LED1
1
SMBJ18A
D1
1
3.9μH
L1
1
10μf
C1
4
100nf
C2, C5, C6, C8
2
22μf
C3, C4
1
1μf
C7
2
10kΩ
R1, R3
1
130Ω
R2

Windlink design files

The KiCad project lives in the connorslade/windlink repository on GitHub; these links point at the commit this page was built from.

Windlink: common questions

What microcontroller does the Windlink use?

The Windlink is built around the ESP32-C6-MINI-1/U, from the ESP32 family.

How big is the Windlink PCB?

The Windlink measures 36 × 26 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Windlink?

20 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Windlink design files?

From the connorslade/windlink repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Windlink design in my own project?

The repository has no license, so all rights stay with connorslade. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Windlink without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards