HardLabs

Scbs stm32g4

CoolNamesAllTaken·scbs·kicad/scbs_stm32g4/scbs_stm32g4.kicad_pcb

Scbs stm32g4 PCB layout, top view — open source RP2040/RP2350 board by CoolNamesAllTaken

About the Scbs stm32g4 PCB

Scbs stm32g4 is an open source RP2040/RP2350 PCB design by CoolNamesAllTaken, published on GitHub. It is a 2-layer board measuring 60 × 60 mm, with 50 components from 24 distinct parts.

Its main chip is the SC0915, from the RP2040/RP2350 family. Other key parts include the TLV9062IDR and BPC-817S ( C BIN ). By type, the board carries 29 resistors, 9 capacitors, 4 transistors, 3 ICs, 3 diodes and 2 connectors.

It belongs with the power & battery designs in this gallery.

From the project

Single Cell Battery Simulator for testing a BMS.

Cellsim 4S is a low-current battery pack simulator that simulates four battery cells in series. Each cell has a settable output voltage between 2.5-4.5V and a readable output current. Communication is done over a 9600 baud UART link using a custom serial protocol.

SCBS Pico is a single battery cell simulator that can be daisy chained with other devices of the same type in order to build a full simulated battery pack. It is the basic building block of the CELLSIM 4S.

Scbs stm32g4, from the project README
From the project README

Main components on the Scbs stm32g4

TLV9062IDRBPC-817S ( C BIN )SC0915

Scbs stm32g4 bill of materials (BOM)

50 components, 24 distinct parts.

QtyPartRefs
1
TLV9062IDR
TLV9062xD
U1
1
BPC-817S ( C BIN )
PC817
U2
1
SC0915
Pico
U3
1
PN2907ATF
2N2907
Q1
1
2N7002
Q2
2
MMBT3904
Q3, Q4
1
PREC006SBAN-M71RC
Conn_01x06_Male
J1
1
4048
Conn_ARM_JTAG_SWD_10
J2
3
1N4148W-TP
1N4148
D1, D2, D3
5
0.1uF
C1, C4, C7, C8, C9
3
DNP
C2, C5, C6
1
1uF
C3
2
2k
R1, R20
3
1k
R2, R14, R26
2
3k3
R3, R4
1
100R
R5
3
390R
R6, R23, R24
2
0R
R7, R13
4
4R 1% 0805
R8, R9, R10, R12
6
10k
R11, R15, R25, R27, R28, R30
Show 4 more
QtyPartRefs
1
DNP
R16
2
500k 0.1%
R17, R18
1
1R
R19
2
8.25M 0.1%
R21, R22

Scbs stm32g4 design files

The KiCad project lives in the CoolNamesAllTaken/scbs repository on GitHub; these links point at the commit this page was built from.

Scbs stm32g4: common questions

What microcontroller does the Scbs stm32g4 use?

The Scbs stm32g4 is built around the SC0915, from the RP2040/RP2350 family.

How big is the Scbs stm32g4 PCB?

The Scbs stm32g4 measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Scbs stm32g4?

50 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Scbs stm32g4 design files?

From the CoolNamesAllTaken/scbs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Scbs stm32g4 design in my own project?

The repository has no license, so all rights stay with CoolNamesAllTaken. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Scbs stm32g4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in scbs

Similar boards