11 open source boards using the TLV9062IDR

Real designs built with the TLV9062IDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TLV9062IDR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TLV9062IDR connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a series resistor on 7 of 7 designs, most often 100 Ω (then 100 MΩ).
  • The -_2 pin has a series resistor on 7 of 7 designs, most often 100 Ω (then 10 MΩ).
  • The V+_8 pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF).
  • The -_6 pin has a series resistor on 6 of 7 designs, most often 100 Ω (then 8.2 MΩ).
Pin 1Connected to: Signal 100%
  • Series resistor on 100% · 100 Ω (3), 100 MΩ (1), 4.99 kΩ (1)
-_2pin 2Connected to: Signal 100%
  • Series resistor on 100% · 100 Ω (2), 10 MΩ (1), 2 MΩ (1)
  • Series capacitor on 43% · 1 nF (2), 10 pF (1), 33 pF (1)
+_3pin 3Connected to: Signal 86%
  • Series resistor on 71% · 10 MΩ (2), 2 kΩ (1), 10 kΩ (1)
  • Capacitor to GND on 43% · 1 nF (1), 100 nF (1), 1 µF (1)
V-_4pin 4Connected to: GND 100%
+_5pin 5Connected to: Signal 100%
  • Series resistor on 57% · 510 kΩ (1), 2 kΩ (1), 10 kΩ (1)
  • Resistor to GND on 57% · 10 kΩ (2), 8.2 MΩ (1), 1 kΩ (1)
  • Capacitor to GND on 57% · 100 nF (3), 1 µF (1)
  • Pull-up to 3.3V on 43% · 10 kΩ (2), 1 kΩ (1)
-_6pin 6Connected to: Signal 86%
  • Series resistor on 86% · 100 Ω (3), 8.2 MΩ (1), 510 kΩ (1)
Pin 7Connected to: Signal 86%
  • Series resistor on 86% · 100 Ω (3), 8.2 MΩ (1), 10 kΩ (1)
V+_8pin 8Connected to: 3.3V 86%
  • Decoupling capacitor on 100% · 100 nF (7), 10 µF (3), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Scbs pico by CoolNamesAllTaken, E nez by gberthou, Unkey by natecermak and BalancerREF OptHead by natehorst240-sketch.

The TLV9062IDR in open source designs

The gallery holds 11 open source boards using the TLV9062IDR from 9 GitHub repositories; a typical one measures about 67 × 82.1 mm and carries around 103 components.

60% use four copper layers or more, and 45% carry an open source license.

The most starred is Scbs stm32g4 by CoolNamesAllTaken.

Parts used alongside the TLV9062IDR

Microcontrollers on boards using the TLV9062IDR

TLV9062IDR: common questions

Where can I find a TLV9062IDR reference design?

Each of the 11 boards on this page is a real design using the TLV9062IDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TLV9062IDR pin 1?

Pin 1 has a series resistor on 7 of 7 designs, most often 100 Ω (then 100 MΩ). Counted from the KiCad layouts of 7 open source designs using the TLV9062IDR.

What resistor goes on the TLV9062IDR -_2 pin?

The -_2 pin has a series resistor on 7 of 7 designs, most often 100 Ω (then 10 MΩ). Counted from the KiCad layouts of 7 open source designs using the TLV9062IDR.

What decoupling capacitors do designs use on the TLV9062IDR V+_8 pin?

The V+_8 pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the TLV9062IDR.

Which microcontrollers do boards using the TLV9062IDR use?

Most are built on STM32 (3), RP2040/RP2350 (2), ESP32 (1) and FPGA (1).

How big is a typical board using the TLV9062IDR?

The median is 67 × 82.1 mm, and 40% are two-layer designs.

What is the most popular open source board using the TLV9062IDR?

By GitHub stars, Scbs stm32g4 by CoolNamesAllTaken, with 4 stars.

Can I simulate one of these boards using the TLV9062IDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part