Ml dev board
About the Ml dev board
Ml dev board is an open source PCB design by coon42, published on GitHub. It is a 2-layer board measuring 100 × 73.2 mm, with 53 components from 24 distinct parts.
Other key parts include the SN74AUP1T34DCK, 93LCxxBxxOT, LD1117S33TR_SOT223, FT4232H and 74HC595. By type, the board carries 18 capacitors, 15 resistors, 6 ICs, 5 connectors, 5 diodes and 2 inductors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A dev kit for connection and communication with the service port of Canon EOS cameras.
Main components on the Ml dev board
Ml dev board bill of materials (BOM)
53 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SN74AUP1T34DCK | SOT-353_SC-70-5 | U1, U2 |
| 1 | 93LCxxBxxOT | SOT-23-6 | U3 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U4 |
| 1 | FT4232H | LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm_no_central_solder_pad | U5 |
| 1 | 74HC595 | TSSOP-16_4.4x5mm_P0.65mm | U6 |
| 1 | IRLML5203 | SOT-23 | Q1 |
| 1 | 12MHz | Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | Y1 |
| 1 | SWD MPU 3v3 | PinHeader_1x05_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | Canon-Service-Connector | IDC-Header_2x04_P2.54mm_Vertical | J2 |
| 1 | USB_B_Mini | USB_Mini-B_Lumberg_2486_01_Horizontal | J3 |
| 1 | Probe Connector | PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left | J4 |
| 1 | canon_service_jumper_terminal | PinHeader_2x08_P2.54mm_Vertical_Jumper_SMD | J5 |
| 3 | Led Red | LED_0805_2012Metric | D1, D3, D5 |
| 2 | Led Green | LED_0805_2012Metric | D2, D4 |
| 2 | 220R@100MHz | L_0805_2012Metric | FB1, FB2 |
| 14 | 100NF 100nF | C_0805_2012Metric | C1, C2, C4, C6, C7, C8, C9, C10 +6 |
| 2 | 30PF 30pF | C_0805_2012Metric | C3, C5 |
| 2 | 4.7uF | CP_EIA-3216-18_Kemet-A | C15, C16 |
| 4 | 10K | R_0805_2012Metric | R1, R2, R3, R8 |
| 1 | 22K | R_0805_2012Metric | R4 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 12K | R_0805_2012Metric | R5 |
| 3 | 1K | R_0805_2012Metric | R6, R13, R15 |
| 1 | 100K | R_0805_2012Metric | R7 |
| 5 | 330R | R_0805_2012Metric | R9, R10, R11, R12, R14 |
Ml dev board design files
The KiCad project lives in the coon42/magic-lantern-dev-kit repository on GitHub; these links point at the commit this page was built from.
Ml dev board: common questions
How big is the Ml dev board?
The Ml dev board measures 100 × 73.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ml dev board?
53 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ml dev board design files?
From the coon42/magic-lantern-dev-kit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ml dev board design in my own project?
The repository has no license, so all rights stay with coon42. Use it as a reference, and ask the author before reusing the design.
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979