13 open source boards using the 93LCxxBxxOT

Real designs built with the 93LCxxBxxOT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the 93LCxxBxxOT

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 93LCxxBxxOT connects to, and the resistors, capacitors and other passives placed on it.

  • The DO pin has a series resistor on 10 of 10 designs, most often 2 kΩ (then 2.2 kΩ).
  • The DI pin has a series resistor on 10 of 10 designs, most often 2 kΩ (then 2.2 kΩ).
  • The DO pin has a pull-up to 3.3V on 9 of 10 designs, most often 10 kΩ.
  • The CLK pin has a pull-up to 3.3V on 9 of 10 designs, most often 10 kΩ.
DOpin 1Connected to: Signal 100%
  • Series resistor on 100% · 2 kΩ (5), 2.2 kΩ (4), 22 kΩ (1)
  • Pull-up to 3.3V on 90% · 10 kΩ (9)
GNDpin 2Connected to: GND 100%
DIpin 3Connected to: FT4232H 30%, FT232HL 20%, FT2232HL 20%
  • Series resistor on 100% · 2 kΩ (5), 2.2 kΩ (4), 22 kΩ (1)
CLKpin 4Connected to: FT4232H 30%, FT232HL 20%, FT2232HL 20%
  • Pull-up to 3.3V on 90% · 10 kΩ (9)
CSpin 5Connected to: FT4232H 30%, FT232HL 20%, FT2232HL 20%
  • Pull-up to 3.3V on 90% · 10 kΩ (9)
VCCpin 6Connected to: 3.3V 90%
  • Decoupling capacitor on 90% · 100 nF (14), 4.7 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fmcw by matthuszagh, Sdcdmuxemmc by hnz1102, Ft4232h by dragonlock2 and Ml dev board by coon42.

The 93LCxxBxxOT in open source designs

The gallery holds 13 open source boards using the 93LCxxBxxOT from 10 GitHub repositories; a typical one measures about 94.6 × 62 mm and carries around 107 components.

62% use four copper layers or more, and 77% carry an open source license.

The most starred is Fmcw by matthuszagh.

Parts used alongside the 93LCxxBxxOT

Microcontrollers on boards using the 93LCxxBxxOT

What boards using the 93LCxxBxxOT are built for

93LCxxBxxOT: common questions

Where can I find a 93LCxxBxxOT reference design?

Each of the 13 boards on this page is a real design using the 93LCxxBxxOT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 93LCxxBxxOT DO pin?

The DO pin has a series resistor on 10 of 10 designs, most often 2 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 10 open source designs using the 93LCxxBxxOT.

What resistor goes on the 93LCxxBxxOT DI pin?

The DI pin has a series resistor on 10 of 10 designs, most often 2 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 10 open source designs using the 93LCxxBxxOT.

What pull-up resistor is used on the 93LCxxBxxOT CLK pin?

The CLK pin has a pull-up to 3.3V on 9 of 10 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the 93LCxxBxxOT.

What parts are used alongside the 93LCxxBxxOT?

The FT4232H, FT2232HL, FT232HL and SPX3819M5-L appear in the most repositories here.

Which microcontrollers do boards using the 93LCxxBxxOT use?

Most are built on FPGA (5).

How big is a typical board using the 93LCxxBxxOT?

The median is 94.6 × 62 mm, and 38% are two-layer designs.

What is the most popular open source board using the 93LCxxBxxOT?

By GitHub stars, Fmcw by matthuszagh, with 66 stars.

Can I simulate one of these boards using the 93LCxxBxxOT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part