8 open source boards using the TPS62840YBGR
Real designs built with the TPS62840YBGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Cenere-Mouse
willwaush
47.8 × 89 mm104 parts4LCC-BY-NC-4.022Wius new
ssavazzi02
54 × 28 mm138 parts6LNo license0STM32
Pangotag PCB LCSC compat2
andrewo3
31.9 × 27.2 mm91 parts6LNo license0ESP32
Xiao esp32-s3-cam
CopperPilot
17.8 × 21.1 mm54 parts4LCERN-OHL-S-2.00Wius placement 1
ssavazzi02
54 × 28 mm130 parts6LNo license0STM32
Pangotag
andrewo3
23 × 18 mm90 parts4LNo license0ESP32
ESP32-C6
uutzinger
17.8 × 30.3 mm43 parts2LNo license0Dongle
andrewo3
29.7 × 21.2 mm11 parts4LNo license0
How designs wire the TPS62840YBGR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS62840YBGR connects to, and the resistors, capacitors and other passives placed on it.
- The VOS_A2 pin has a inductor on 5 of 5 designs, most often 2.2 µH (then 470 nH).
- The SW_B2 pin has a inductor on 5 of 5 designs, most often 2.2 µH (then 470 nH).
- The VOS_A2 pin has a decoupling capacitor on 4 of 5 designs, most often 10 µF (then 100 nF).
- The VIN_B1 pin has a decoupling capacitor on 4 of 5 designs, most often 4.7 µF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_A1pin A1 | Connected to: GND 80% · a signal 20% | — |
| VOS_A2pin A2 | Connected to: 3.3V 80% · a signal 20% |
|
| VIN_B1pin B1 | Connected to: VSW 80% · a signal 20% |
|
| SW_B2pin B2 | Connected to: Signal 100% |
|
| EN_C1pin C1 | Connected to: Signal 60% · VSW 40% |
|
| VSET_C2pin C2 | Connected to: Signal 80% · VIN 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cenere-Mouse by willwaush, Pangotag PCB by andrewo3, Xiao esp32-s3-cam by CopperPilot and Wius new by ssavazzi02.
The TPS62840YBGR in open source designs
The gallery holds 8 open source boards using the TPS62840YBGR from 5 GitHub repositories; a typical one measures about 30.8 × 27.6 mm and carries around 91 components.
88% use four copper layers or more, and 13% carry an open source license.
The most starred is Cenere-Mouse by willwaush.
Parts used alongside the TPS62840YBGR
Microcontrollers on boards using the TPS62840YBGR
What boards using the TPS62840YBGR are built for
TPS62840YBGR: common questions
Where can I find a TPS62840YBGR reference design?
Each of the 8 boards on this page is a real design using the TPS62840YBGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS62840YBGR VOS_A2 pin connected?
The VOS_A2 pin has a inductor on 5 of 5 designs, most often 2.2 µH (then 470 nH). Counted from the KiCad layouts of 5 open source designs using the TPS62840YBGR.
How is the TPS62840YBGR SW_B2 pin connected?
The SW_B2 pin has a inductor on 5 of 5 designs, most often 2.2 µH (then 470 nH). Counted from the KiCad layouts of 5 open source designs using the TPS62840YBGR.
What decoupling capacitors do designs use on the TPS62840YBGR VIN_B1 pin?
The VIN_B1 pin has a decoupling capacitor on 4 of 5 designs, most often 4.7 µF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the TPS62840YBGR.
Which microcontrollers do boards using the TPS62840YBGR use?
Most are built on ESP32 (2), STM32 (2) and Nordic nRF (1).
How big is a typical board using the TPS62840YBGR?
The median is 30.8 × 27.6 mm, and 13% are two-layer designs.
What is the most popular open source board using the TPS62840YBGR?
By GitHub stars, Cenere-Mouse by willwaush, with 22 stars.
Can I simulate one of these boards using the TPS62840YBGR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.