Pico link hw

coroiu·pico-link-hw·hardware/pico-link-hw.kicad_pcb

Pico link hw PCB layout, top view — open source RP2040/RP2350 board by coroiu

About the Pico link hw PCB

Pico link hw is an open source RP2040/RP2350 PCB design by coroiu, published on GitHub under the Custom license license. It is a 2-layer board measuring 118 × 50 mm, with 69 components from 33 distinct parts.

Its main chip is the RP2350B, from the RP2040/RP2350 family. Other key parts include the AP2114H-3.3TRG1, W25Q128JVS, APS6404L-3SQR-ZR, ESP32-WROOM-32UE-N4 and AP3031KTR-G1. By type, the board carries 29 capacitors, 19 resistors, 7 switches, 6 ICs, 3 connectors and 2 inductors.

From the project

Custom PCB + 3D-printed enclosure design for Pico Link

KiCad project goes here: schematic, PCB layout, footprints, and a BOM with JLCPCB/LCSC part numbers.

pico-link-hw.kicadpro / pico-link-hw.kicadsch is the root KiCad 8 project. The root sheet holds one hierarchical sheet symbol per subsystem, each pointing at its own (currently empty) child .kicadsch`:

- power.kicadsch — power subsystem (pilink-7el.2) - rp2350bmemory.kicadsch — RP2350B + flash/PSRAM (pilink-7el.3) - esp32bt.kicadsch — ESP32-WROOM-32UE BT coprocessor (pilink-7el.4, amended by pilink-wot) - display.kicadsch — ST7789V display (pilink-7el.5) - input.kicadsch — buttons +…

Main components on the Pico link hw

Pico link hw bill of materials (BOM)

69 components, 33 distinct parts.

QtyPartRefs
1
AP2114H-3.3TRG1
U1
1
RP2350B
U101
1
W25Q128JVS
U102
1
APS6404L-3SQR-ZR
U103
1
ESP32-WROOM-32UE-N4
U201
1
AP3031KTR-G1
U501
1
ABM8-272-T3
Y101
1
SWD_DEBUG_3PIN
J101
1
TYPE-C-31-D-09
J401
1
AFC01-S40FCA-00
J501
1
1A PTC (SMD0805B100TFT)
F401
2
SW_Push
SW101, SW102
1
EC11E18244AU
SW303
4
SW_Push
SW305, SW306, SW307, SW308
1
B5819W
D501
1
3.3uH
L101
1
4.7uH
L501
4
10uF
C1, C119, C201, C501
1
22uF
C2
15
100nF
C3, C106, C107, C108, C109, C110, C111, C112 +7
Show 13 more
QtyPartRefs
2
15pF
C101, C102
4
4.7uF
C103, C104, C105, C118
1
2.2uF
C121
1
1uF
C203
1
0.47uF
C502
3
1k
R101, R102, R103
1
33R
R104
1
100k
R105
2
10k
R201, R202
3
3.3k
R303, R304, R309
6
10k
R305, R306, R307, R308, R403, R404
2
5.1k
R401, R402
1
5.1R
R501

Pico link hw design files

The KiCad project lives in the coroiu/pico-link-hw repository on GitHub; these links point at the commit this page was built from.

Pico link hw: common questions

What microcontroller does the Pico link hw use?

The Pico link hw is built around the RP2350B, from the RP2040/RP2350 family.

How big is the Pico link hw PCB?

The Pico link hw measures 118 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pico link hw?

69 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pico link hw design files?

From the coroiu/pico-link-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pico link hw design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Pico link hw without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards