Sapflux heater

Coweeta·sapflux-heater

Sapflux heater PCB layout, top view — open source board by Coweeta

About the Sapflux heater PCB

Sapflux heater is an open source PCB design by Coweeta, published on GitHub. It is a 2-layer board measuring 38.1 × 63.5 mm, with 37 components from 23 distinct parts.

Other key parts include the TL431LP and LM358. By type, the board carries 16 resistors, 8 connectors, 4 diodes, 3 transistors, 3 capacitors and 2 ICs.

It belongs with the power & battery designs in this gallery.

From the project

Circuit to control heater elements in sapflux experiments

To measure the rate of sap flow through trees using either the thermal disipation method or the pulse method a means of injecting heat into the sapwood is required. This is done by passing an electrical current through a resistive element embedded in the tree. Depending of which of the two methods is employed a continuous heat flow of 250mW or a pulse of around 10J is required. The power source is usually 12V, be it a mains powered power supply, a standalone battery, or a battery recharged from a photovoltaic system. In the last two scenarios the supplied voltage can vary by several voltages…

Sapflux heater, from the project README
From the project README

Main components on the Sapflux heater

Sapflux heater bill of materials (BOM)

37 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TL431LP
U1
1
LM358
U2
1
IRFB7546PBF
irfb7546pbf
Q2
1
BC337
Q3
1
2N5401-T
CMPT3906
Q4
2
SCREW_TERMINAL_1X02
Screw_Terminal_1x02
J1, J2
1
SCREW_TERMINAL_1X04
Screw_Terminal_1x04
J3
2
CONN_01X01
J4, J6
2
CONN_01X01
J5, J10
1
CONN_01X01
J7
1
10K
10k
RV1
1
D_Zener
D1
1
LED
D2
1
FR154-B
D
D3
1
1.5KE18A
D_Zener
D4
3
10N
10n
C1, C2, C3
2
10K
10k
R1, R2
1
4.7K
4.7k
R3
3
1k
R4, R12, R14
6
100K
100k
R5, R9, R10, R15, R16, R17
Show 3 more
QtyPartRefs
1
0R
R6
2
33K
33k
R7, R8
1
1.5K
1.5k
R13

Sapflux heater design files

The KiCad project lives in the Coweeta/sapflux-heater repository on GitHub; these links point at the commit this page was built from.

Sapflux heater: common questions

How big is the Sapflux heater PCB?

The Sapflux heater measures 38.1 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sapflux heater?

37 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sapflux heater design files?

From the Coweeta/sapflux-heater repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Sapflux heater design in my own project?

The repository has no license, so all rights stay with Coweeta. Use it as a reference, and ask the author before reusing the design.

Similar boards