FDD-Excalibur Interface
Cptscorcher·Excallibur-64·Kicad/FDD/FDD-Excalibur Interface.kicad_pcb
About the FDD-Excalibur Interface PCB
FDD-Excalibur Interface is an open source PCB design by Cptscorcher, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 121 × 107.3 mm, with 47 components from 31 distinct parts.
Other key parts include the 74HCT175, 2MHz, 74LS06, 74HCT74 and 74HCT32. By type, the board carries 13 capacitors, 10 ICs, 9 test points, 8 resistors, 1 crystal and 1 jumper.
From the project
A reimagining of the seminal Excalibur 64 Computer
Changed compiler from sjasmplus to z88dk, my asm skills aren't good enough to make something decent. There is no video yet, that is a separate beast.
Goal for this project ===================== Design build a new version of the Excalibur 64. First major goal is to get all but the video going. Final version will have video as per original design.
Design requirements ================== 1. Needs to have the same look and feel of a real Excalibur 64. So the circuit for the sound and, parallel and keyboard is the same but with CMOS where possible. 2. Same goes for the video but need to think…
Main components on the FDD-Excalibur Interface
FDD-Excalibur Interface bill of materials (BOM)
47 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HCT175 | DIP-16_W7.62mm_LongPads | IC15 |
| 1 | 2MHz | Oscillator_DIP-8 | IC17 |
| 2 | 74LS06 | DIP-14_W7.62mm_LongPads | IC18, IC22 |
| 1 | 74HCT74 WD2793 | DIP-40_W15.24mm_LongPads | IC19 |
| 1 | 74HCT32 | DIP-14_W7.62mm_LongPads | IC20 |
| 1 | 74HC74 | DIP-14_W7.62mm_LongPads | IC21 |
| 1 | 74HC125 | DIP-14_W7.62mm_LongPads | IC23 |
| 1 | 4521 | DIP-16_W7.62mm_LongPads | IC24 |
| 1 | 74HC4053 | DIP-16_W7.62mm_LongPads | IC25 |
| 1 | FDD | IDC-Header_2x17-1MP_P2.54mm_Latch_Horizontal | X5 |
| 1 | TEST | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 4 | 50K | Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV3, RV4 |
| 1 | WD | TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP1 |
| 1 | TG43 | TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP2 |
| 1 | HDEN | TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP3 |
| 1 | 8 | PinHeader_1x02_P2.54mm_Vertical | TP4 |
| 1 | DIRC | TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP5 |
| 1 | CLK | TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP6 |
| 1 | 5 | PinHeader_1x02_P2.54mm_Vertical | TP7 |
| 1 | GND | TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP8 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3 | PinHeader_1x02_P2.54mm_Vertical | TP9 |
| 1 | 1N4148 | Diode | D3 |
| 1 | 100NF 100n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C16 |
| 8 | 100n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C19, C20, C21, C22, C25, C26, C27, C30 |
| 1 | 5.5-65p | C_trimmer_6mm | C23 |
| 1 | 5p | C_Disc_D5.0mm_W2.5mm_P5.00mm | C24 |
| 2 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C28, C29 |
| 2 | 4K7 | Resistor | R2, R10 |
| 4 | 150Ω | Resistor | R3, R4, R5, R6 |
| 1 | 1K | Resistor | R7 |
| 1 | 10K | Resistor | R8 |
FDD-Excalibur Interface design files
The KiCad project lives in the Cptscorcher/Excallibur-64 repository on GitHub; these links point at the commit this page was built from.
FDD-Excalibur Interface: common questions
How big is the FDD-Excalibur Interface PCB?
The FDD-Excalibur Interface measures 121 × 107.3 mm, has 2 copper layers and is 1.58002 mm thick.
How many components are on the FDD-Excalibur Interface?
47 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FDD-Excalibur Interface design files?
From the Cptscorcher/Excallibur-64 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FDD-Excalibur Interface design in my own project?
Yes, under the terms of its GPL-3.0 license, which Cptscorcher chose for the repository.