12 open source boards using the 74HC4053
Real designs built with the 74HC4053, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Tapecart diy
ikorb
33 × 53 mm25 parts2LNo license57NXP
Equipo AVL - vRaptor
brengi
120 × 80 mm160 parts2LNo license7Color
Noah1989
160 × 100 mm75 parts2LMIT2ESP32
Tas5805m mux board
cbaurtx
99.1 × 99.1 mm96 parts4LCERN-OHL-W-2.00Lock in amplifier
cLLeB
90 × 60 mm50 parts2LNo license0Microchip SAM
Tapecart release
ikorb
23.5 × 19.8 mm21 parts2LNo license57ESP32
Pcm5102a mux board
cbaurtx
100 × 50 mm80 parts4LCERN-OHL-W-2.00Microchip SAM
Tapecart release-1s
ikorb
23.6 × 24 mm21 parts2LNo license57FDD-Excalibur Interface
Cptscorcher
121 × 107.3 mm47 parts2LGPL-3.00GPIO - 74HC4053-HEADER
tronixio
50 × 25 mm9 parts2LNo license0Tapecart progif
ikorb
41.5 × 56 mm19 parts2LNo license57Duotape
ikorb
27.5 × 45.8 mm9 parts2LNo license57
How designs wire the 74HC4053
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74HC4053 connects to, and the resistors, capacitors and other passives placed on it.
- The VEE pin is tied to GND on 7 of 7 designs.
- The E# pin is tied to GND on 6 of 7 designs.
- The VCC pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| E#pin 6 | Connected to: GND 86% | — |
| VEEpin 7 | Connected to: GND 100% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: VCC 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Duotape by ikorb, Equipo AVL - vRaptor by brengi, Color by Noah1989 and Pcm5102a mux board by cbaurtx.
The 74HC4053 in open source designs
The gallery holds 12 open source boards using the 74HC4053 from 7 GitHub repositories; a typical one measures about 70 × 54.5 mm and carries around 36 components.
83% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Tapecart diy by ikorb.
Microcontrollers on boards using the 74HC4053
What boards using the 74HC4053 are built for
74HC4053: common questions
Where can I find a 74HC4053 reference design?
Each of the 12 boards on this page is a real design using the 74HC4053. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HC4053 VEE pin connected?
The VEE pin is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the 74HC4053.
How is the 74HC4053 E# pin connected?
The E# pin is tied to GND on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the 74HC4053.
What decoupling capacitors do designs use on the 74HC4053 VCC pin?
The VCC pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 74HC4053.
Which microcontrollers do boards using the 74HC4053 use?
Most are built on ESP32 (2), Microchip SAM (2), AVR/Arduino (1) and NXP (1).
How big is a typical board using the 74HC4053?
The median is 70 × 54.5 mm, and 83% are two-layer designs.
What is the most popular open source board using the 74HC4053?
By GitHub stars, Tapecart diy by ikorb, with 57 stars.
Can I simulate one of these boards using the 74HC4053 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.