50 open source boards using the 74HC125
Real designs built with the 74HC125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Kicad color schemes
pointhi
157.5 × 91.4 mm162 partsCC0-1.0716- schematic only · 160 parts
Copperhead
copperheadhq
160 partsApache-2.0669 ESP32
Duet 2
Duet3D
100 × 123 mm348 partsCERN-OHL-1.2258AVR/Arduino
OTTOtact
cester-ino
307 × 131.2 mm224 parts2LGPL-3.049AVR/Arduino
Alamode
wyolum
85.1 × 55.9 mm75 partsNo license35AVR/Arduino
Z80Atmega128
46nori
170 × 130 mm105 parts4LGPL-3.09ESP8266
Soil Sensor Hub
ArtoLabs
98 × 91.1 mm74 parts2LMIT3Beaglebone spi flasher cape
mrnuke
86.4 × 54.6 mm18 parts2LNo license3AVR/Arduino
OTTOtact
cester-ino
307 × 131.2 mm224 parts2LGPL-3.02SERIAL PIC PROGRAMMER
zymaxcii
160 × 99.1 mm55 partsNo license1R1007
pluggee
69 × 38.6 mm33 parts4LGPL-3.01Steuereinheit
stonedDiscord
259.7 × 80 mm236 parts2LNo license0Kit dev coldfire xilinx 5213
nickradfc
157.5 × 91.4 mm157 parts4LNo license0Prueba kicad-2
alvaro-salazar
157.5 × 91.4 mm157 parts4LNo license074xx pdp8 ma md register board
sebsikora
137.2 × 88.9 mm42 parts4LNo license0SPIEX01
mlab-modules
50.3 × 50.3 mm16 parts2LGPL-3.00ESP8266
Duet WIFI
Duet3D
100 × 123 mm345 partsCERN-OHL-1.2258Coldfire
claynicholson
157.5 × 91.4 mm157 parts4LMIT102YATMA2 transistor matcher
elektrouwe
49.5 × 49.5 mm19 parts2LCC0-1.07STM32
OTTO-main
cester-ino
239 × 80 mm100 parts2LGPL-3.02AVR/Arduino
Nova pcb v6
Ace2932
112 × 90 mm51 parts4LMIT1Kit dev coldfire xilinx 5213
nickradfc
157.5 × 91.4 mm157 parts4LNo license0Kit dev coldfire xilinx 5213
circuitly
157.5 × 91.4 mm157 parts4LNo license0PIC
SERIAL PIC PROGRAMMER
thisis-romar
160 × 99.1 mm55 parts2LNo license0ChainlinkDriver
scottbez1
198.1 × 30.5 mm58 parts2LApache-2.04.2kMicrochip SAM
Duet 2 Maestro
Duet3D
100 × 123 mm336 partsCERN-OHL-1.2258Aunit
Velko
62.2 × 21.6 mm51 parts4LMIT1674HCT6526 Board 0
dmolinagarcia
100 × 100 mm73 parts4LNo license14Z80-VDP
dennis9819
160 × 100.3 mm77 parts2LNo license2SERIAL PIC PROGRAMMER
palginpav
160 × 99.1 mm55 parts2LApache-2.01ChainlinkDriver
kiwonbyun
198.1 × 30.5 mm58 parts2LApache-2.00FDD-Excalibur Interface
Cptscorcher
121 × 107.3 mm47 parts2LGPL-3.0074xx pdp8 register board
sebsikora
137.2 × 88.9 mm39 parts4LNo license0AVR/Arduino
ALaMode v3
wyolum
85.1 × 55.9 mm76 partsNo license1ChainlinkDriver
rossbb
198.1 × 30.5 mm58 parts2LApache-2.00ChainlinkDriver
orgTestCodacy11KRepos110MB
198.1 × 30.5 mm58 parts2LApache-2.00
How designs wire the 74HC125
Read from the KiCad layouts of 34 open source designs, one per repository: what each pin of the 74HC125 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 22 of 34 designs, most often 100 nF (then 10 µF).
- The O pins have a series resistor on 15 of 34 designs, most often 270 Ω (then 470 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Opin 3, 6, 8, 11 | Connected to: A connector 31% |
|
| GNDpin 7 | Connected to: GND 97% | — |
| VCCpin 14 | Connected to: 3.3V 97% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ChainlinkDriver by scottbez1, Kicad color schemes by pointhi, Duet 2 by Duet3D and Coldfire by claynicholson.
The 74HC125 in open source designs
The gallery holds 50 open source boards using the 74HC125 from 36 GitHub repositories; a typical one measures about 157.5 × 91.1 mm and carries around 58 components.
62% are two-layer designs, the rest use four layers or more, and 58% carry an open source license.
The most starred is ChainlinkDriver by scottbez1.
Parts used alongside the 74HC125
Microcontrollers on boards using the 74HC125
What boards using the 74HC125 are built for
74HC125: common questions
Where can I find a 74HC125 reference design?
Each of the 50 boards on this page is a real design using the 74HC125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC125 VCC pin?
The VCC pin has a decoupling capacitor on 22 of 34 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 34 open source designs using the 74HC125.
What resistor goes on the 74HC125 O pin?
The O pins have a series resistor on 15 of 34 designs, most often 270 Ω (then 470 Ω). Counted from the KiCad layouts of 34 open source designs using the 74HC125.
What parts are used alongside the 74HC125?
The 74AHC1G14, MAX202, MCF5213-LQFP100, PCA82C251 and XCR3256-TQ144 appear in the most repositories here.
Which microcontrollers do boards using the 74HC125 use?
Most are built on AVR/Arduino (7), PIC (3), ESP8266 (2) and ESP32 (1).
How big is a typical board using the 74HC125?
The median is 157.5 × 91.1 mm, and 62% are two-layer designs.
What is the most popular open source board using the 74HC125?
By GitHub stars, ChainlinkDriver by scottbez1, with 4,156 stars.
Can I simulate one of these boards using the 74HC125 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.