Fpc and usb plug
About the Fpc and usb plug PCB
Fpc and usb plug is an open source PCB design by csiz, published on GitHub under the MIT license. It is a 2-layer board measuring 6 × 10.5 mm, with 7 components from 5 distinct parts.
By type, the board carries 4 resistors and 1 diode.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
FOC driver for a single BLDC motor.
Brushless motor driver for mini gear motors and servos. This driver focuses on fine force control using field oriented control (FOC). The motor can be commanded to move to track position, velocity, and/or force. The driver will maintain the current wave exactly 90 degrees out of phase to the EMF wave for maximum efficieny. Position is tracked via hall sensors, EMF feedback and I2C rotary sensors.
Fpc and usb plug bill of materials (BOM)
7 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2856803 ~ | FPC-20P-P0.50-Pattern | FPC1 |
| 1 | C393939 ~ HANBO(汉博) | USB-C-SMD_TC-005 | USB1 |
| 1 | C8598 ~ PROTEK | SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR | D12 |
| 2 | 56kΩ UNI-ROYAL(厚声) | R0603 | R17, R76 |
| 2 | 1MΩ UNI-ROYAL(厚声) | R0402 | R96, R103 |
Fpc and usb plug design files
The KiCad project lives in the csiz/hex-single-motor-mini-drive repository on GitHub; these links point at the commit this page was built from.
Fpc and usb plug: common questions
How big is the Fpc and usb plug PCB?
The Fpc and usb plug measures 6 × 10.5 mm, has 2 copper layers and is 1.67 mm thick.
How many components are on the Fpc and usb plug?
7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fpc and usb plug design files?
From the csiz/hex-single-motor-mini-drive repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Fpc and usb plug design in my own project?
Yes, under the terms of its MIT license, which csiz chose for the repository.
More boards in hex-single-motor-mini-drive
ESP32Hex master motor control circuit
64 × 86 mm236 parts4LMIT9
STM32Hex minidrive
29 × 51 mm94 parts4LMIT9
Hex master cable extender circuit
160 × 70 mm75 parts2LMIT9
STM32Hex mini drive
18 × 50 mm62 parts4LMIT9
Hex Rotation Sensor Circuit Panel
70 × 70 mm40 parts2LMIT9
Plug block
12.7 × 12.7 mm18 parts4LMIT9
Back to back mosfets
5.6 × 5 mm6 parts4LMIT9
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ControllerCurrentShuntAddOn
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k