Okgo2mini
cuspaceflight·OkGo·okgo2mini/board/okgo2mini.kicad_pcb
About the Okgo2mini PCB
Okgo2mini is an open source STM32 PCB design by cuspaceflight, published on GitHub. It is a 2-layer board measuring 67.4 × 39.8 mm, with 43 components from 26 distinct parts.
Its main chip is the STM32F051K6T7, from the STM32 family. Other key parts include the BQ24232HA, ADP3335, TPS62130 and RFM95W. By type, the board carries 17 capacitors, 7 resistors, 6 connectors, 6 diodes, 5 ICs and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
Rocket motor ignition and valve control from far, far away
Main components on the Okgo2mini
Okgo2mini bill of materials (BOM)
43 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ24232HA | QFN-16-EP-TI | IC1 |
| 1 | STM32F051K6T7 | LQFP-32 | IC2 |
| 1 | ADP3335 | MSOP-8 | IC3 |
| 1 | TPS62130 | QFN-16-EP-TI | IC4 |
| 1 | RFM95W | RFM95W | U1 |
| 1 | BATT | S03B-PASK-2 | J1 |
| 1 | MICROUSB STRAIGHT | USB_Micro_B_Vertical | J2 |
| 1 | PYRO | S02B-PASK-2 | J3 |
| 1 | SWD | FTSH-105-01-F-D-K | P1 |
| 1 | SWD_TC | TC2030-NL | P2 |
| 1 | ANT | SMA-EDGE | P3 |
| 1 | SWITCH_SPST | 710xxxxV3xx | SW1 |
| 1 | CHARGING | 0805-LED | D1 |
| 1 | ARM | 0805-LED | D2 |
| 2 | PMEG2005AEA | SOD-323 | D3, D6 |
| 2 | ESD_DIODE | 0603 | D4, D5 |
| 1 | 2u2 | XFL4020 | L1 |
| 4 | 1u | 0603 | C1, C3, C9, C10 |
| 1 | 10n | 0603 | C2 |
| 3 | 4u7 | 0603 | C4, C6, C8 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100n | 0603 | C5, C7, C13, C15 |
| 5 | 10u | 0603 | C11, C12, C14, C16, C17 |
| 1 | 4k32 | 0603 | R1 |
| 2 | R | 0603 | R2, R3 |
| 2 | 100k | 0603 | R4, R5 |
| 2 | 3k3 | 0603 | R6, R7 |
Okgo2mini design files
The KiCad project lives in the cuspaceflight/OkGo repository on GitHub; these links point at the commit this page was built from.
Okgo2mini: common questions
What microcontroller does the Okgo2mini use?
The Okgo2mini is built around the STM32F051K6T7, from the STM32 family.
How big is the Okgo2mini PCB?
The Okgo2mini measures 67.4 × 39.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Okgo2mini?
43 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Okgo2mini design files?
From the cuspaceflight/OkGo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Okgo2mini design in my own project?
The repository has no license, so all rights stay with cuspaceflight. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Okgo2mini without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in OkGo
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k