21 open source boards using the RFM95W

Real designs built with the RFM95W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the RFM95W

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the RFM95W connects to, and the resistors, capacitors and other passives placed on it.

  • The 3.3V pin is tied to 3.3V on 10 of 11 designs.
  • The DIO3 pin is left unconnected on 8 of 11 designs (a signal on 3).
  • The DIO4 pin is left unconnected on 8 of 11 designs (a signal on 3).
  • The DIO2 pin is left unconnected on 7 of 10 designs (a signal on 3).
GNDpin 1, 8, 10Connected to: GND 71% · a signal 24%
DIO3pin 11Connected to: Not connected 73% · a signal 27%
DIO4pin 12Connected to: Not connected 73% · a signal 27%
3.3Vpin 13Connected to: 3.3V 91%
DIO2pin 16Connected to: Not connected 70% · a signal 30%

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rfm9x breakout board by attexx, Lora node esp32 by Christophe45, Smartyreader ng lora by weigu1 and Uart-Sdi by ComNets-Bremen.

The RFM95W in open source designs

The gallery holds 21 open source boards using the RFM95W from 12 GitHub repositories; a typical one measures about 57.2 × 52.8 mm and carries around 36 components.

90% are two-layer designs, the rest use four layers or more, and 19% carry an open source license.

The most starred is Rfm9x breakout board by attexx.

Parts used alongside the RFM95W

Microcontrollers on boards using the RFM95W

RFM95W: common questions

Where can I find a RFM95W reference design?

Each of the 21 boards on this page is a real design using the RFM95W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RFM95W 3.3V pin connected?

The 3.3V pin is tied to 3.3V on 10 of 11 designs. Counted from the KiCad layouts of 12 open source designs using the RFM95W.

How is the RFM95W DIO3 pin connected?

The DIO3 pin is left unconnected on 8 of 11 designs (a signal on 3). Counted from the KiCad layouts of 12 open source designs using the RFM95W.

How is the RFM95W DIO4 pin connected?

The DIO4 pin is left unconnected on 8 of 11 designs (a signal on 3). Counted from the KiCad layouts of 12 open source designs using the RFM95W.

Which microcontrollers do boards using the RFM95W use?

Most are built on STM32 (9), ESP32 (5), Microchip SAM (2) and ESP8266 (1).

How big is a typical board using the RFM95W?

The median is 57.2 × 52.8 mm, and 90% are two-layer designs.

What is the most popular open source board using the RFM95W?

By GitHub stars, Rfm9x breakout board by attexx, with 30 stars.

Can I simulate one of these boards using the RFM95W before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part