CybdoClock
Cybdo·CybdoClock·PCB/CybdoClock.kicad_pcb
About the CybdoClock PCB
CybdoClock is an open source ESP32 PCB design by Cybdo, published on GitHub under the MIT license. It is a 2-layer board measuring 155 × 155 mm, with 233 components from 10 distinct parts.
Its main chip is the XIAO-ESP32-C6-DIP, from the ESP32 family. Other key parts include the 74HCT595. By type, the board carries 197 diodes, 15 resistors, 14 transistors, 5 ICs and 1 capacitor.
It belongs with the iot & wireless designs in this gallery.
From the project
word clock / calendar / whatever. I'm too broke to afford a good looking word clock so i'm making my own !!
14 by 14 letter word clock / calendar / whatever, powered by esp32-c6!
Word clocks are arguably better and cooler than normal analog or digital clocks, but they are way too expensive comercially for a decent product, and even then there's not much customisation to it (the only one i could find was over 1000 dollars and could only show the time in 5 minute increments). CybdoClock was made to be able to show time down to the minute, in multiple formats, all while being customisable and allowing for different uses. The face plate can be swapped to show different languages or formats, and a…
Main components on the CybdoClock
CybdoClock bill of materials (BOM)
233 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C6-DIP | XIAO-ESP32-C6-DIP | U1 |
| 4 | 74HCT595 | SOIC-16_3.9x9.9mm_P1.27mm | U2, U3, U4, U5 |
| 7 | CJL2301 CJ(江苏长电/长晶) | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 7 | HSW6822 HUASHUO(华朔) | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | Q8, Q9, Q10, Q11, Q12, Q13, Q14 |
| 1 | 3296W-1-103LF | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 196 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +188 |
| 1 | ALS-PDIC144-6C/L378 | LED_D3.0mm | D197 |
| 1 | 100NF 100nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 28KR 28kR | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 14 | 220R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R9 +6 |
CybdoClock design files
The KiCad project lives in the Cybdo/CybdoClock repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/CybdoClock.kicad_pcb
- SchematicPCB/CybdoClock.kicad_sch
- BOMPCB/kicad-bom.csv
CybdoClock: common questions
What microcontroller does the CybdoClock use?
The CybdoClock is built around the XIAO-ESP32-C6-DIP, from the ESP32 family.
How big is the CybdoClock PCB?
The CybdoClock measures 155 × 155 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CybdoClock?
233 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CybdoClock design files?
From the Cybdo/CybdoClock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CybdoClock design in my own project?
Yes, under the terms of its MIT license, which Cybdo chose for the repository.
Can I test firmware for the CybdoClock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k