NotGoingToBeLateToSchool

DagaVedant·NotGoingToBeLateToSchool·PCB/kicad_schematic/kicad_schematic.kicad_pcb

NotGoingToBeLateToSchool PCB layout, top view — open source ESP32 board by DagaVedant

About the NotGoingToBeLateToSchool PCB

NotGoingToBeLateToSchool is an open source ESP32 PCB design by DagaVedant, published on GitHub under the MIT license. It is a 2-layer board measuring 69.5 × 97 mm, with 21 components from 5 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 9 switches, 9 diodes, 1 IC, 1 connector and 1 buzzer.

It belongs with the displays & leds and iot & wireless designs in this gallery.

From the project

a 9-key bedside alarm clock thats also a ambient info display, wakes you up by telling your phone to play Spotify, and only lets you snooze three times before you have to type a code to shut it up.

a 9 key alarm clock that makes you type a code to shut it up.

built on a xiao esp32c3 for BLARE. during the day it sits on my desk cycling through weather, hackatime hours, now playing and world clocks. at 6am it tells my phone to start playing spotify instead of screaming at me with a piezo. you get 3 snoozes, and on the 3rd one you have to type a code on the keypad before it stops.

NotGoingToBeLateToSchool, from the project README
From the project README

Main components on the NotGoingToBeLateToSchool

NotGoingToBeLateToSchool bill of materials (BOM)

21 components, 5 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
Conn_01x08_Pin
J1
1
Buzzer
BZ1
9
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1
9
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +1

NotGoingToBeLateToSchool design files

The KiCad project lives in the DagaVedant/NotGoingToBeLateToSchool repository on GitHub; these links point at the commit this page was built from.

NotGoingToBeLateToSchool: common questions

What microcontroller does the NotGoingToBeLateToSchool use?

The NotGoingToBeLateToSchool is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the NotGoingToBeLateToSchool PCB?

The NotGoingToBeLateToSchool measures 69.5 × 97 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the NotGoingToBeLateToSchool?

21 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the NotGoingToBeLateToSchool design files?

From the DagaVedant/NotGoingToBeLateToSchool repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the NotGoingToBeLateToSchool design in my own project?

Yes, under the terms of its MIT license, which DagaVedant chose for the repository.

Can I test firmware for the NotGoingToBeLateToSchool without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards