HardLabs

Esp32c3 test

daidai100·PCB-stuffs·esp32c3_test/esp32c3_test.kicad_pcb

Esp32c3 test PCB layout, top view — open source ESP32 board by daidai100

About the Esp32c3 test PCB

Esp32c3 test is an open source ESP32 PCB design by daidai100, published on GitHub under the MIT license. It is a 2-layer board measuring 21.6 × 47 mm, with 3 components from 2 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. By type, the board carries 2 connectors and 1 IC.

From the project

PCB datas

Main components on the Esp32c3 test

ESP32-C3-WROOM-02

Esp32c3 test bill of materials (BOM)

3 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-WROOM-02
U1
2
CONN_01X09_PIN
Conn_01x09_Pin
J1, J2

Esp32c3 test design files

The KiCad project lives in the daidai100/PCB-stuffs repository on GitHub; these links point at the commit this page was built from.

Esp32c3 test: common questions

What microcontroller does the Esp32c3 test use?

The Esp32c3 test is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Esp32c3 test PCB?

The Esp32c3 test measures 21.6 × 47 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32c3 test?

3 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32c3 test design files?

From the daidai100/PCB-stuffs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32c3 test design in my own project?

Yes, under the terms of its MIT license, which daidai100 chose for the repository.

Can I test firmware for the Esp32c3 test without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PCB-stuffs

Similar boards