Esp32c3

daidai100·PCB-stuffs·esp32c3d4/esp32c3.kicad_pcb

Esp32c3 PCB layout, top view — open source ESP32 board by daidai100

About the Esp32c3 PCB

Esp32c3 is an open source ESP32 PCB design by daidai100, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 12 components from 7 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the NJM2845DL1-33-TE1. By type, the board carries 6 ICs, 4 connectors and 2 diodes.

From the project

PCB datas

Main components on the Esp32c3

Esp32c3 bill of materials (BOM)

12 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-WROOM-02
U1
1
~
U2
1
NJM2845DL1-33-TE1
U3
3
~
U4, U5, U6
2
CONN_01X07_PIN
Conn_01x07_Pin
J1, J2
2
CONN_01X04_PIN
Conn_01x04_Pin
J3, J4
2
LED
D1, D2

Esp32c3 design files

The KiCad project lives in the daidai100/PCB-stuffs repository on GitHub; these links point at the commit this page was built from.

Esp32c3: common questions

What microcontroller does the Esp32c3 use?

The Esp32c3 is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Esp32c3 PCB?

The Esp32c3 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Esp32c3?

12 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp32c3 design files?

From the daidai100/PCB-stuffs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp32c3 design in my own project?

Yes, under the terms of its MIT license, which daidai100 chose for the repository.

Can I test firmware for the Esp32c3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PCB-stuffs

Similar boards