Motor driver
About the Motor driver PCB
Motor driver is an open source PCB design by daisuke-ym, published on GitHub. It is a 2-layer board measuring 80 × 74 mm, with 67 components from 18 distinct parts.
Other key parts include the FDS4559, 74HC00 and IR2302. By type, the board carries 28 resistors, 12 diodes, 9 capacitors, 8 transistors, 6 ICs and 2 modules.
It belongs with the robotics & motion designs in this gallery.
Main components on the Motor driver
Motor driver bill of materials (BOM)
67 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | FDS4559 TLP627-4 | DIP-16_W7.62mm | U1, U2 |
| 1 | 74HC00 IR2302 | DIP-8_W7.62mm | U3 |
| 3 | IR2302 | DIP-8_W7.62mm | U4, U5, U6 |
| 2 | Motor_DC | PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical | M1, M2 |
| 8 | Q_NMOS_GDS | TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | CONN_01X12 Motor Power | PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical | J1 |
| 1 | Input Logic | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 4 | 1N4148 | D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D1, D2, D7, D8 |
| 8 | 1N4007 | D_DO-41_SOD81_P2.54mm_Vertical_KathodeUp | D3, D4, D5, D6, D9, D10, D11, D12 |
| 1 | 0.1U 10u | C_Disc_D6.0mm_W4.4mm_P5.00mm | C1 |
| 3 | 10u | C_Disc_D6.0mm_W4.4mm_P5.00mm | C2, C5, C6 |
| 4 | 0.1u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4, C7, C8 |
| 1 | 470u 50V | CP_Radial_D12.5mm_P5.00mm | C9 |
| 13 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R7, R9, R10, R14, R15, R16 +5 |
| 1 | 2K2 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 3 | 2K2 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4, R5, R6 |
| 5 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R8, R11, R18, R23, R24 |
| 6 | 390 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R25, R26, R27, R28, R29, R30 |
Motor driver design files
The KiCad project lives in the daisuke-ym/motor-driver repository on GitHub; these links point at the commit this page was built from.
Motor driver: common questions
How big is the Motor driver PCB?
The Motor driver measures 80 × 74 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motor driver?
67 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Motor driver design files?
From the daisuke-ym/motor-driver repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Motor driver design in my own project?
The repository has no license, so all rights stay with daisuke-ym. Use it as a reference, and ask the author before reusing the design.
More boards in motor-driver
Patch board2022a
230 × 63 mm115 parts2LNo license0
Patch board
230 × 63 mm104 parts2LNo license0
Patch board2022b
153 × 58 mm81 parts2LNo license0
Motor controller
100 × 100 mm66 parts2LNo license0
Line sensor
140 × 40 mm39 parts2LNo license0
AVR/ArduinoMotor driver2026a
50 × 50 mm32 parts2LNo license0
Line sensor2
60 × 50 mm23 parts2LNo license0
Motor driver tpc8408
33 × 21 mm13 parts2LNo license0
Motor driver tpc8408-panel-2x4
92 × 90 mm13 parts2LNo license0
Object sensor2022a panelize4x1
80 × 78 mm8 parts2LNo license0
Wall sensor
40 × 40 mm8 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979