15 open source boards using the IR2302

Real designs built with the IR2302, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the IR2302

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the IR2302 connects to, and the resistors, capacitors and other passives placed on it.

  • The VS pin has a series capacitor on 10 of 10 designs, most often 1 µF (then 10 µF).
  • The VB pin has a series capacitor on 10 of 10 designs, most often 1 µF (then 100 nF).
  • The LO pin has a series resistor on 9 of 10 designs, most often 10 Ω (then 4.7 Ω).
  • The HO pin has a series resistor on 9 of 10 designs, most often 10 Ω (then 4.7 Ω).
VCCpin 1Connected to: 12V 100%
  • Decoupling capacitor on 80% · 100 nF (6), 1 µF (1), 4.7 µF (1)
INpin 2Connected to: The microcontroller 30%, a connector 20%
  • Resistor to GND on 30% · 10 kΩ (3)
COMpin 4Connected to: GND 100%
LOpin 5Connected to: Signal 100%
  • Series resistor on 90% · 10 Ω (4), 4.7 Ω (4), 47 Ω (1)
VSpin 6Connected to: A connector 70%, Motor_DC 20%
  • Series capacitor on 100% · 1 µF (5), 10 µF (4), 100 nF (2)
  • Series resistor on 70% · 10 kΩ (5), 47 kΩ (2)
HOpin 7Connected to: Signal 100%
  • Series resistor on 90% · 10 Ω (4), 4.7 Ω (4), 47 Ω (1)
VBpin 8Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (4), 100 nF (2), 10 µF (2)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include IR2302-testboard by rusefi, ガチ夫 by TOBA-Robocon, LargeMD by Tomoshibi-technology and Md v3 by 22060.

The IR2302 in open source designs

The gallery holds 15 open source boards using the IR2302 from 10 GitHub repositories; a typical one measures about 78 × 49.9 mm and carries around 76 components.

93% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is IR2302-testboard by rusefi.

Microcontrollers on boards using the IR2302

IR2302: common questions

Where can I find a IR2302 reference design?

Each of the 15 boards on this page is a real design using the IR2302. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the IR2302 VS pin connected?

The VS pin has a series capacitor on 10 of 10 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the IR2302.

How is the IR2302 VB pin connected?

The VB pin has a series capacitor on 10 of 10 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the IR2302.

What resistor goes on the IR2302 LO pin?

The LO pin has a series resistor on 9 of 10 designs, most often 10 Ω (then 4.7 Ω). Counted from the KiCad layouts of 10 open source designs using the IR2302.

What parts are used alongside the IR2302?

The AZ1084CD-3.3, LF50_TO220, MAX3485 and STM32F303K8Tx appear in the most repositories here.

Which microcontrollers do boards using the IR2302 use?

Most are built on STM32 (7), AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the IR2302?

The median is 78 × 49.9 mm, and 93% are two-layer designs.

What is the most popular open source board using the IR2302?

By GitHub stars, IR2302-testboard by rusefi, with 48 stars.

Can I simulate one of these boards using the IR2302 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part