Patch board2022b
About the Patch board2022b PCB
Patch board2022b is an open source PCB design by daisuke-ym, published on GitHub. It is a 2-layer board measuring 153 × 58 mm, with 81 components from 45 distinct parts.
Other key parts include the FDS4559, 74HC00, 74HC08 and TLP785. By type, the board carries 38 connectors, 16 resistors, 14 ICs, 7 capacitors, 4 switches and 2 diodes.
It belongs with the robotics & motion designs in this gallery.
Main components on the Patch board2022b
Patch board2022b bill of materials (BOM)
81 components, 45 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FDS4559 74HC00 | SO-14_5.3x10.2mm_P1.27mm | U1 |
| 1 | FDS4559 74HC08 | SO-14_5.3x10.2mm_P1.27mm | U2 |
| 1 | 74HC00 74HC08 | SO-14_5.3x10.2mm_P1.27mm | U3 |
| 1 | 74HC00 | SO-14_5.3x10.2mm_P1.27mm | U4 |
| 2 | 74HC08 | SO-14_5.3x10.2mm_P1.27mm | U5, U6 |
| 8 | TLP785 | DIP-4_W7.62mm | U11, U12, U13, U14, U15, U16, U17, U18 |
| 1 | CONN_01X12 USB_B | USB_B_OST_USB-B1HSxx_Horizontal | J1 |
| 1 | LOGIC POWER SUPPLY | PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | MEGA_13-8 | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | MEGA_7-0 | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | MEGA_14-21 | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | MEGA_A8-A15 | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | MEGA_A0-A7 | PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | MEGA_POWER | PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | MEGA_22-53 | PinHeader_2x18_P2.54mm_Vertical | J9 |
| 1 | SERVO POWER SUPPLY | BarrelJack_Horizontal | J10 |
| 1 | AOUT1 | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | AOUT2 | PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | AOUT3 | PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | AOUT4 | PinHeader_1x03_P2.54mm_Vertical | J14 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AOUT5 | PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | AOUT6 | PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | AOUT7 | PinHeader_1x03_P2.54mm_Vertical | J17 |
| 1 | AOUT8 | PinHeader_1x03_P2.54mm_Vertical | J18 |
| 8 | SV | PinHeader_1x03_P2.54mm_Vertical | J21, J22, J23, J24, J25, J26, J27, J28 |
| 1 | S01 | PinHeader_1x03_P2.54mm_Vertical | J31 |
| 1 | S02 | PinHeader_1x03_P2.54mm_Vertical | J32 |
| 1 | S03 | PinHeader_1x03_P2.54mm_Vertical | J33 |
| 1 | S04 | PinHeader_1x03_P2.54mm_Vertical | J34 |
| 1 | S05 | PinHeader_1x03_P2.54mm_Vertical | J35 |
| 1 | S06 | PinHeader_1x03_P2.54mm_Vertical | J36 |
| 1 | S07 | PinHeader_1x03_P2.54mm_Vertical | J37 |
| 1 | S08 | PinHeader_1x03_P2.54mm_Vertical | J38 |
| 1 | S09 | PinHeader_1x03_P2.54mm_Vertical | J39 |
| 1 | S10 | PinHeader_1x03_P2.54mm_Vertical | J40 |
| 1 | S11 | PinHeader_1x03_P2.54mm_Vertical | J41 |
| 1 | S12 | PinHeader_1x03_P2.54mm_Vertical | J42 |
| 1 | RESET | DTS-6-V-2 | SW1 |
| 2 | SW_DPST | DTS-6-V-2 | SW11, SW12 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | SW13 |
| 2 | WS2813 | LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D1, D2 |
| 1 | 0.1U 0.1u | C_Disc_D3.4mm_W2.1mm_P2.50mm | C1 |
| 6 | 0.1u | C_Disc_D3.4mm_W2.1mm_P2.50mm | C2, C3, C4, C5, C6, C10 |
| 12 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R7, R8, R9, R10, R11, R12 +4 |
| 4 | 2K2 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6 |
Patch board2022b design files
The KiCad project lives in the daisuke-ym/motor-driver repository on GitHub; these links point at the commit this page was built from.
Patch board2022b: common questions
How big is the Patch board2022b PCB?
The Patch board2022b measures 153 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Patch board2022b?
81 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Patch board2022b design files?
From the daisuke-ym/motor-driver repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Patch board2022b design in my own project?
The repository has no license, so all rights stay with daisuke-ym. Use it as a reference, and ask the author before reusing the design.
More boards in motor-driver
Patch board2022a
230 × 63 mm115 parts2LNo license0
Patch board
230 × 63 mm104 parts2LNo license0
Motor driver
80 × 74 mm67 parts2LNo license0
Motor controller
100 × 100 mm66 parts2LNo license0
Line sensor
140 × 40 mm39 parts2LNo license0
AVR/ArduinoMotor driver2026a
50 × 50 mm32 parts2LNo license0
Line sensor2
60 × 50 mm23 parts2LNo license0
Motor driver tpc8408-panel-2x4
92 × 90 mm13 parts2LNo license0
Motor driver tpc8408
33 × 21 mm13 parts2LNo license0
Object sensor2022a panelize4x1
80 × 78 mm8 parts2LNo license0
Wall sensor
40 × 40 mm8 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979