Flight Controller
damnitzhemanth-oss·Flight_Controller·PCB/FlightController_Drone.kicad_pcb
About the Flight Controller PCB
Flight Controller is an open source STM32 PCB design by damnitzhemanth-oss, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 146 components from 69 distinct parts.
Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the TPS54336ADDA, LP5907MFX-3.3, USBLC6-2SC6, ICM-42688-P and W25Q128JVS. By type, the board carries 52 resistors, 51 capacitors, 13 connectors, 10 diodes, 7 ICs and 5 inductors.
It belongs with the robotics & motion designs in this gallery.
From the project
Custom STM based flightcontroller designed from scratch.
A custom 4 layer flight controller built from scratch for YSWS Pixl. This follows a hybrid approach of 50mm50mm which is not normal for actual FCs on drone. This is only a paper-design**. This has not been manufactured yet.
This FC contains minimal architecture (as i am a rookie), it does not contain in built barometer or OSD.
''' FlightController ├── PCB │ ├── FlightControllerDrone.csv │ ├── FlightControllerDrone.kicadpcb │ ├── FlightControllerDrone.kicadpro │ ├── FlightControllerDrone.kicadsch │ └── gerbers.zip ├── README.md └── images ├── DRAFT │ ├── S102.png │ ├── S112.png │ ├──…

Main components on the Flight Controller
Flight Controller bill of materials (BOM)
146 components, 69 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54336ADDA | TI_SO-PowerPAD-8_ThermalVias | U1 |
| 1 | LP5907MFX-3.3 | SOT-23-5 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | STM32F405RGTX STM32F405RGTx | LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | ICM-42688-P | LGA14_2P5X3X0P91_TDK | U5 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U6 |
| 1 | 74AHCT1G125 | SOT-353_SC-70-5 | U7 |
| 1 | AO3401 | SOT-23 | Q1 |
| 1 | 2N7002 | SOT-23 | Q2 |
| 1 | X32258MSB4SI | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | X321532768KGD2SI | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P1.27mm_Vertical | J1 |
| 6 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2, J5, J6, J7, J8, J13 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J3 |
| 5 | CONN_01X04_PIN Conn_01x04_Pin | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J9, J10, J11, J12, J14 |
| 1 | JK-MSMD1812P200TF JK-mSMD1812P200TF | Fuse_1812_4532Metric | F1 |
| 1 | 500 mA | Fuse_1812_4532Metric | F2 |
| 1 | BOOT | SW_SPST_TL3342 | SW1 |
| 1 | RESET | SW_SPST_TL3342 | SW2 |
| 1 | SMBJ28A | D_SMB | D1 |
Show 49 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BZT52C10 | D_SOD-323 | D2 |
| 2 | BAT54S | SOT-23 | D3, D4 |
| 1 | LEDG | LED_0603_1608Metric | D5 |
| 1 | LEDB | LED_0603_1608Metric | D6 |
| 2 | SS14 | D_SOD-323 | D7, D10 |
| 1 | 1N4148W | D_SOD-323 | D8 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D9 |
| 3 | BLM21PG601SN1D | L_0805_2012Metric | FB1, FB2, FB3 |
| 1 | BLM18PG601SN1D | L_0805_2012Metric | FB4 |
| 1 | SWPA6045S150MT | L_6.3x6.3_H3 | L1 |
| 4 | 10 uF, 35V | C_1206_3216Metric | C1, C2, C3, C8 |
| 4 | 100 nF, 50V | C_0603_1608Metric | C4, C5, C9, C10 |
| 1 | 100 nF, 25V | C_0603_1608Metric | C6 |
| 1 | 100 nF, 16V | C_0603_1608Metric | C7 |
| 2 | 22 uF, 10V | C_0805_2012Metric | C11, C12 |
| 3 | 100 nF, 10V | C_0603_1608Metric | C13, C19, C24 |
| 1 | 100 pF | C_0603_1608Metric | C14 |
| 1 | 100 nF | C_0603_1608Metric | C15 |
| 1 | 10 nF | C_0603_1608Metric | C16 |
| 2 | 10 uF, 10V | C_0805_2012Metric | C17, C18 |
| 2 | 10 uF, 6.3V | C_0805_2012Metric | C20, C22 |
| 1 | 100 nF, 6.3V | C_0805_2012Metric | C21 |
| 1 | JK-MSMD1206P050TF JK-mSMD1206P050TF | C_0603_1608Metric | C23 |
| 13 | 100 nF, 16V | C_0402_1005Metric | C25, C26, C27, C28, C34, C37, C38, C39 +5 |
| 1 | 10 uF, 10V | C_1206_3216Metric | C29 |
| 1 | 2.2 uF, 6.3V | C_0603_1608Metric | C35 |
| 1 | 10 nF, 16V | C_0402_1005Metric | C36 |
| 3 | 4.7 uF, 6.3V | C_0603_1608Metric | C41, C42, C55 |
| 2 | 2.2 uF, 6.3V, ESR < 2Ω | C_0603_1608Metric | C43, C44 |
| 1 | 100 nF | C_0402_1005Metric | C45 |
| 1 | 1 uF | C_0603_1608Metric | C46 |
| 2 | 18 pF | C_0402_1005Metric | C47, C48 |
| 2 | 12.5 pF | C_0402_1005Metric | C49, C50 |
| 14 | 10k Ω | R_0603_1608Metric | R1, R21, R22, R23, R24, R25, R32, R37 +6 |
| 6 | 10 kΩ | R_0603_1608Metric | R2, R6, R7, R9, R18, R19 |
| 4 | 1 kΩ | R_0603_1608Metric | R3, R4, R5, R11 |
| 1 | 1.91 kΩ | R_0603_1608Metric | R8 |
| 1 | 100 kΩ | R_0603_1608Metric | R10 |
| 1 | 100 kΩ | R_0603_1608Metric | R12 |
| 1 | 330 Ω | R_0603_1608Metric | R13 |
| 2 | 5.1 kΩ | R_0603_1608Metric | R14, R15 |
| 2 | 22Ω | R_0603_1608Metric | R16, R17 |
| 1 | 1 MΩ | R_0603_1608Metric | R20 |
| 12 | 33Ω | R_0402_1005Metric | R27, R28, R29, R30, R33, R34, R35, R36 +4 |
| 1 | 33 Ω | R_0603_1608Metric | R31 |
| 1 | 1 kΩ | R_0402_1005Metric | R48 |
| 2 | 10 kΩ | R_0402_1005Metric | R49, R51 |
| 1 | 330 Ω | R_0402_1005Metric | R50 |
| 2 | 4.7 kΩ | R_0402_1005Metric | R52, R53 |
Flight Controller design files
The KiCad project lives in the damnitzhemanth-oss/Flight_Controller repository on GitHub; these links point at the commit this page was built from.
Flight Controller: common questions
What microcontroller does the Flight Controller use?
The Flight Controller is built around the STM32F405RGTX, from the STM32 family.
How big is the Flight Controller PCB?
The Flight Controller measures 50 × 50 mm, has 4 copper layers and is 1.56 mm thick.
How many components are on the Flight Controller?
146 components, from 69 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flight Controller design files?
From the damnitzhemanth-oss/Flight_Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flight Controller design in my own project?
The repository has no license, so all rights stay with damnitzhemanth-oss. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Flight Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k