HouseholdWaterMonitoringSystem

Danielbaker31·HouseholdWaterMonitoringSystem·MonitoringSystem_PCB/MonitoringSystem_PCB.kicad_pcb

HouseholdWaterMonitoringSystem PCB layout, top view — open source ESP32 board by Danielbaker31

About the HouseholdWaterMonitoringSystem PCB

HouseholdWaterMonitoringSystem is an open source ESP32 PCB design by Danielbaker31, published on GitHub. It is a 2-layer board measuring 89 × 45 mm, with 92 components from 42 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R2, from the ESP32 family. Other key parts include the TDC7200PW, CP2102N-Axx-xQFN24, LM1117MP-3.3 and TDC1000PW. By type, the board carries 29 resistors, 28 capacitors, 11 diodes, 6 connectors, 5 ICs and 5 test points.

From the project

This is a personal side project created by Daniel, Advait, and Jack. It is a household water monitoring system, allowing households to track how much water they are using, and pinpoint from which source it is coming from.

https://danielbaker31.github.io/HouseholdWaterMonitoringSystem/

Main components on the HouseholdWaterMonitoringSystem

HouseholdWaterMonitoringSystem bill of materials (BOM)

92 components, 42 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1-N16R2
U2
1
TDC7200PW
U3
1
CP2102N-Axx-xQFN24
U4
1
LM1117MP-3.3
U6
1
TDC1000PW
U11
2
SS8050-G
Q1, Q2
1
ULTRASONIC_CONN_2
Conn_01x02
J1
1
UJ2-BH-W1-TH
J2
1
ULTRASONIC_CONN_1
Conn_01x02
J3
1
CONN_ARM_JTAG_SWD_10
Conn_ARM_JTAG_SWD_10
J4
1
046288015000846+
J5
1
Conn_01x05_Female
J6
2
SOLDERJUMPER_3_OPEN
SolderJumper_3_Open
JP1, JP2
1
SOLDERJUMPER_2_OPEN
SolderJumper_2_Open
JP3
3
SW_Push
SW1, SW2, SW3
5
TestPoint
TP1, TP2, TP3, TP4, TP5
2
SZESD9B5.0ST5G
SMAJ5.0CA
D1, D2
1
MBR0520
D3
1
SMAJ5.0CA
D4
1
PWR_IND
D5
Show 22 more
QtyPartRefs
1
PAIR_IND
D6
1
CONN_IND
D7
4
MBR0520
D8, D9, D10, D11
7
1 uF
C1, C4, C7, C13, C24, C25, C32
1
4.7 uF
C2
6
0.1 uF
C3, C6, C12, C16, C18, C29
4
10 uF
C5, C19, C30, C31
2
RX_GAIN
C8, C9
3
0.01 uF
C14, C15, C17
1
1 nF
C20
1
53 pF
C21
1
50 pF
C22
2
2.2 uF
C23, C26
5
10K
10k
R1, R2, R14, R15, R16
2
100K
100k
R3, R4
7
1k
R5, R6, R7, R9, R18, R19, R20
1
5k
R8
1
66.67K
66.67k
R10
4
4.7K
4.7k
R11, R12, R13, R17
1
100k
R21
2
TRACE_MATCH
R22, R23
6
SPI_R
R24, R25, R26, R27, R28, R29

HouseholdWaterMonitoringSystem design files

The KiCad project lives in the Danielbaker31/HouseholdWaterMonitoringSystem repository on GitHub; these links point at the commit this page was built from.

HouseholdWaterMonitoringSystem: common questions

What microcontroller does the HouseholdWaterMonitoringSystem use?

The HouseholdWaterMonitoringSystem is built around the ESP32-S3-WROOM-1-N16R2, from the ESP32 family.

How big is the HouseholdWaterMonitoringSystem PCB?

The HouseholdWaterMonitoringSystem measures 89 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HouseholdWaterMonitoringSystem?

92 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HouseholdWaterMonitoringSystem design files?

From the Danielbaker31/HouseholdWaterMonitoringSystem repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HouseholdWaterMonitoringSystem design in my own project?

The repository has no license, so all rights stay with Danielbaker31. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HouseholdWaterMonitoringSystem without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards