HardLabs

Stm32F103Board

danielvilas·DigitalTrains·MimicPanel/LayoutPanelOld/Stm32F103Board/Stm32F103Board.kicad_pcb

Stm32F103Board PCB layout, top view — open source AVR/Arduino board by danielvilas

About the Stm32F103Board PCB

Stm32F103Board is an open source AVR/Arduino PCB design by danielvilas, published on GitHub under the MIT license. It is a 2-layer board measuring 104 × 77 mm, with 26 components from 10 distinct parts.

Its main chip is the Arduino_Nano_v2.x, from the AVR/Arduino family. Other key parts include the ARDUINO_PRO_MINI. By type, the board carries 22 connectors, 1 IC, 1 module, 1 diode and 1 resistor.

From the project

Digital Trains

Main components on the Stm32F103Board

ARDUINO_PRO_MINIArduino_Nano_v2.x

Stm32F103Board bill of materials (BOM)

26 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ARDUINO_PRO_MINI
U1
1
Arduino_Nano_v2.x
A1
10
Conn_01x03
J1, J2, J3, J4, J6, J7, J8, J9 +2
2
Conn_02x03_Odd_Even
J5, J19
3
Conn_01x06
J10, J12, J13
1
Conn_01x04
J11
4
Conn_01x08
J15, J16, J20, J21
2
Conn_02x08_Odd_Even
J17, J18
1
LED
D1
1
1K
R1

Stm32F103Board design files

The KiCad project lives in the danielvilas/DigitalTrains repository on GitHub; these links point at the commit this page was built from.

Stm32F103Board: common questions

What microcontroller does the Stm32F103Board use?

The Stm32F103Board is built around the Arduino_Nano_v2.x, from the AVR/Arduino family.

How big is the Stm32F103Board PCB?

The Stm32F103Board measures 104 × 77 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm32F103Board?

26 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stm32F103Board design files?

From the danielvilas/DigitalTrains repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Stm32F103Board design in my own project?

Yes, under the terms of its MIT license, which danielvilas chose for the repository.

Can I test firmware for the Stm32F103Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in DigitalTrains

Similar boards