HydraBusBreakoutCard

danstruthers·hydra-16·board/HydraBusBreakoutCard/HydraBusBreakoutCard.kicad_pcb

HydraBusBreakoutCard PCB layout, top view — open source board by danstruthers

About the HydraBusBreakoutCard PCB

HydraBusBreakoutCard is an open source PCB design by danstruthers, published on GitHub. It is a 2-layer board measuring 106.7 × 105.4 mm, with 11 components from 11 distinct parts.

It belongs with the retro computing and usb & debug tools designs in this gallery.

From the project

6502-based multi-tasking hardware and software project

A multitasking 65C02 computer and its operating system, HydraOS.

The Hydra-16's hardware gives each of 16 tasks its own 32K of RAM, zero page and stack included, with its own RAM and ROM bank selections, so a task switch is one register write. HydraOS runs on it, Plan 9's way: One kernel in the BIOS ROM: a preemptive scheduler, one interrupt path, notes, memory and banks, and a jump table made from a specification. Everything else is a module of the paged ROM, run in place in a task of its own. A base to build on: the kernel, a serial console driver, the kernel's devices and Woz's monitor…

HydraBusBreakoutCard bill of materials (BOM)

11 components, 11 distinct parts.

QtyPartRefs
1
Bus_Hydra_8bit
J1
1
Data Bus
J2
1
Address Bus
J3
1
SPI
J4
1
Interrupts & I/O
J5
1
Clocks
J6
1
Bus Control
J7
1
Reset
J8
1
Audio
J9
1
I2C
J10
1
Power
J11

HydraBusBreakoutCard design files

The KiCad project lives in the danstruthers/hydra-16 repository on GitHub; these links point at the commit this page was built from.

HydraBusBreakoutCard: common questions

How big is the HydraBusBreakoutCard PCB?

The HydraBusBreakoutCard measures 106.7 × 105.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HydraBusBreakoutCard?

11 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the HydraBusBreakoutCard design files?

From the danstruthers/hydra-16 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HydraBusBreakoutCard design in my own project?

The repository has no license, so all rights stay with danstruthers. Use it as a reference, and ask the author before reusing the design.

More boards in hydra-16

Similar boards