MemDaughterCard SurfaceMount
danstruthers·hydra-16·board/MemoryDaughterCard/MemDaughterCard_SurfaceMount.kicad_pcb
About the MemDaughterCard SurfaceMount PCB
MemDaughterCard SurfaceMount is an open source PCB design by danstruthers, published on GitHub. It is a 2-layer board measuring 88.9 × 67.3 mm, with 18 components from 7 distinct parts.
Other key parts include the HM628512LFP-7 and 74LS139. By type, the board carries 9 ICs, 5 capacitors and 4 connectors.
It belongs with the retro computing and usb & debug tools designs in this gallery.
From the project
6502-based multi-tasking hardware and software project
A multitasking 65C02 computer and its operating system, HydraOS.
The Hydra-16's hardware gives each of 16 tasks its own 32K of RAM, zero page and stack included, with its own RAM and ROM bank selections, so a task switch is one register write. HydraOS runs on it, Plan 9's way: One kernel in the BIOS ROM: a preemptive scheduler, one interrupt path, notes, memory and banks, and a jump table made from a specification. Everything else is a module of the paged ROM, run in place in a task of its own. A base to build on: the kernel, a serial console driver, the kernel's devices and Woz's monitor…
Main components on the MemDaughterCard SurfaceMount
MemDaughterCard SurfaceMount bill of materials (BOM)
18 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | HM628512LFP-7 | SOIC127P1414X300-32N | IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8 |
| 1 | 74LS139 | DIP-16_W7.62mm | U1 |
| 1 | Conn_01x32 | PinHeader_1x32_P2.54mm_Vertical | J1 |
| 1 | Conn_01x24 | PinHeader_1x24_P2.54mm_Vertical | J2 |
| 1 | Conn_02x15_Odd_Even | PinHeader_2x15_P2.54mm_Vertical | J3 |
| 1 | Conn_01x15_Pin | PinHeader_1x15_P2.54mm_Vertical | J4 |
| 5 | .1uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5 |
MemDaughterCard SurfaceMount design files
The KiCad project lives in the danstruthers/hydra-16 repository on GitHub; these links point at the commit this page was built from.
MemDaughterCard SurfaceMount: common questions
How big is the MemDaughterCard SurfaceMount PCB?
The MemDaughterCard SurfaceMount measures 88.9 × 67.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MemDaughterCard SurfaceMount?
18 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the MemDaughterCard SurfaceMount design files?
From the danstruthers/hydra-16 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MemDaughterCard SurfaceMount design in my own project?
The repository has no license, so all rights stay with danstruthers. Use it as a reference, and ask the author before reusing the design.
More boards in hydra-16
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k