Hydra-16
danstruthers·hydra-16·board/hydra-16.kicad_pcb
About the Hydra-16 PCB
Hydra-16 is an open source PCB design by danstruthers, published on GitHub. It is a 6-layer board measuring 304.8 × 243.8 mm, with 199 components from 75 distinct parts.
Other key parts include the SN74LS219AN, LF353P, WDC65C02S, R65C22-P2 and R65C51-P2. By type, the board carries 77 capacitors, 68 ICs, 29 connectors, 24 resistors and 1 crystal.
It belongs with the retro computing and usb & debug tools designs in this gallery.
From the project
6502-based multi-tasking hardware and software project
A multitasking 65C02 computer and its operating system, HydraOS.
The Hydra-16's hardware gives each of 16 tasks its own 32K of RAM, zero page and stack included, with its own RAM and ROM bank selections, so a task switch is one register write. HydraOS runs on it, Plan 9's way: One kernel in the BIOS ROM: a preemptive scheduler, one interrupt path, notes, memory and banks, and a jump table made from a specification. Everything else is a module of the paged ROM, run in place in a task of its own. A base to build on: the kernel, a serial console driver, the kernel's devices and Woz's monitor…
Main components on the Hydra-16
Hydra-16 bill of materials (BOM)
199 components, 75 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | SN74LS219AN 74LS219 | DIP-16_W7.62mm_Socket_LongPads | IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8 |
| 1 | LF353P | DIP-8_W7.62mm_Socket_LongPads | IC9 |
| 1 | WDC65C02S | DIP-40_W15.24mm_Socket_LongPads | U1 |
| 1 | R65C22-P2 | DIP-40_W15.24mm_Socket_LongPads | U2 |
| 1 | R65C51-P2 | DIP-28_W15.24mm_Socket_LongPads | U3 |
| 3 | 74F138 | DIP-16_W7.62mm_Socket_LongPads | U4, U20, U24 |
| 1 | MAX232 | DIP-16_W7.62mm_Socket_LongPads | U5 |
| 1 | SST39SF0x0A | PLCC-32_THT-Socket | U6 |
| 1 | HM628512LP-5 | DIP-32_W15.24mm_Socket_LongPads | U7 |
| 2 | 74LS260 | DIP-14_W7.62mm_Socket_LongPads | U8, U9 |
| 1 | 74F20 | DIP-14_W7.62mm_Socket_LongPads | U10 |
| 1 | 74F08 | DIP-14_W7.62mm_Socket_LongPads | U11 |
| 1 | 74F86 | DIP-14_W7.62mm_Socket_LongPads | U12 |
| 3 | 74F32 | DIP-14_W7.62mm_Socket_LongPads | U13, U16, U56 |
| 1 | 74F30 | DIP-14_W7.62mm_Socket_LongPads | U14 |
| 2 | 74F00 | DIP-14_W7.62mm_Socket_LongPads | U15, U44 |
| 2 | 74LS148 | DIP-16_W7.62mm_Socket_LongPads | U17, U18 |
| 2 | 74LS154 | DIP-24_W15.24mm_Socket_LongPads | U19, U23 |
| 7 | 74F541 | DIP-20_W7.62mm_Socket_LongPads | U21, U49, U51, U53, U55, U58, U60 |
| 1 | 74F240 | DIP-20_W7.62mm_Socket_LongPads | U22 |
Show 55 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | HM628512LP-5 | SOP-32_11.305x20.495mm_P1.27mm | U25, U27, U28, U29 |
| 1 | 74F139 | DIP-16_W7.62mm_Socket_LongPads | U26 |
| 8 | SST39SF040 | DIP-32_W15.24mm_Socket_LongPads | U30, U31, U32, U33, U34, U35, U36, U37 |
| 1 | YM2151 | DIP-24_W15.24mm_Socket_LongPads | U38 |
| 1 | 74ACT14 | DIP-14_W7.62mm_Socket_LongPads | U39 |
| 1 | 74F191 | DIP-16_W7.62mm_Socket_LongPads | U40 |
| 1 | YM3012 | DIP-16_W7.62mm_Socket_LongPads | U41 |
| 1 | TL074CN TL074 Texas Instruments | DIP-14_W7.62mm_Socket_LongPads | U42 |
| 1 | LM334Z/NOPB DM1813-10 Texas Instruments | TO-92_Inline_Wide | U43 |
| 1 | 74F157 | DIP-16_W7.62mm_Socket_LongPads | U45 |
| 4 | 74F573 | DIP-20_W7.62mm_Socket_LongPads | U48, U50, U52, U54 |
| 1 | 74F02 | DIP-14_W7.62mm_Socket_LongPads | U57 |
| 1 | 74F245 | DIP-20_W7.62mm_Socket_LongPads | U59 |
| 1 | 74F125 | DIP-14_W7.62mm_Socket_LongPads | U61 |
| 1 | 14.31818MHz | Crystal_HC18-U_Vertical | Y1 |
| 1 | Conn_01x32 | PinSocket_1x32_P2.54mm_Vertical | J1 |
| 1 | Conn_01x24 | PinSocket_1x24_P2.54mm_Vertical | J2 |
| 1 | L77SDE09SA4CH3R DSUB_9 | L77SDE09SA4CH3R | J3 |
| 1 | 22-23-2021 RDY Pull_Up Molex | PinHeader_2x01_P2.54mm_Vertical | J4 |
| 1 | 22-23-2021 0.89489MHz Molex | PinHeader_2x01_P2.54mm_Vertical | J5 |
| 1 | 22-23-2021 1.78977MHz Molex | PinHeader_2x01_P2.54mm_Vertical | J6 |
| 1 | 22-23-2021 3.57955MHz Molex | PinHeader_2x01_P2.54mm_Vertical | J7 |
| 1 | 22-23-2021 7.15909MHz Molex | PinHeader_2x01_P2.54mm_Vertical | J8 |
| 1 | 22-23-2021 SND CT1/2 Molex | PinHeader_2x01_P2.54mm_Vertical | J9 |
| 1 | Front Panel | PinHeader_2x06_P2.54mm_Vertical | J10 |
| 1 | ATX-24 | Molex_Mini-Fit_Jr_5566-24A2_2x12_P4.20mm_Vertical | J11 |
| 1 | SLOT 0 | TE_7-5530843-0 | J12 |
| 1 | SLOT 1 | TE_7-5530843-0 | J13 |
| 1 | SLOT 2 | TE_7-5530843-0 | J14 |
| 1 | SLOT 3 | TE_7-5530843-0 | J15 |
| 1 | SLOT 4 | TE_7-5530843-0 | J16 |
| 1 | SLOT 5 | TE_7-5530843-0 | J17 |
| 1 | SPI Device 0 | PinSocket_1x06_P2.54mm_Vertical | J18 |
| 1 | SPI Device 1 | PinSocket_1x06_P2.54mm_Vertical | J19 |
| 1 | SPI Device 2 | PinSocket_1x06_P2.54mm_Vertical | J20 |
| 1 | SPI Device 3 | PinSocket_1x06_P2.54mm_Vertical | J21 |
| 1 | SPI Device 4 | PinSocket_1x06_P2.54mm_Vertical | J22 |
| 1 | SPI Device 5 | PinSocket_1x06_P2.54mm_Vertical | J23 |
| 1 | SPI Device 6 | PinSocket_1x06_P2.54mm_Vertical | J24 |
| 1 | SPI Device 7 | PinSocket_1x06_P2.54mm_Vertical | J25 |
| 1 | Audio Jack | Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J26 |
| 1 | VIA Port A | PinHeader_2x06_P2.54mm_Vertical | J27 |
| 1 | A 16-LC-TT SP720APP Assmann WSW Components | DIP-16_W7.62mm_Socket_LongPads | J28 |
| 1 | 22-23-2021 Audio In 6 Molex | PinHeader_2x01_P2.54mm_Vertical | J29 |
| 62 | 104 | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C5, C6, C12, C13, C14 +54 |
| 5 | 105 | C_Disc_D5.0mm_W2.5mm_P2.50mm | C4, C7, C8, C9, C10 |
| 2 | 330 | C_Disc_D5.0mm_W2.5mm_P2.50mm | C47, C48 |
| 1 | 475 | C_Disc_D5.0mm_W2.5mm_P5.00mm | C49 |
| 2 | 332 | C_Disc_D5.0mm_W2.5mm_P2.50mm | C50, C52 |
| 5 | 107 | CP_Radial_D6.3mm_P2.50mm | C51, C53, C54, C55, C56 |
| 1 | 105 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 471 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 101 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 18 | 103 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R5, R6, R7, R8, R9, R10, R11 +10 |
| 3 | 332 | R_Array_SIP9 | RN1, RN2, RN3 |
Hydra-16 design files
The KiCad project lives in the danstruthers/hydra-16 repository on GitHub; these links point at the commit this page was built from.
- Layoutboard/hydra-16.kicad_pcb
- Schematicboard/hydra-16.kicad_sch
Hydra-16: common questions
How big is the Hydra-16 PCB?
The Hydra-16 measures 304.8 × 243.8 mm, has 6 copper layers and is 1.566 mm thick.
How many components are on the Hydra-16?
199 components, from 75 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hydra-16 design files?
From the danstruthers/hydra-16 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hydra-16 design in my own project?
The repository has no license, so all rights stay with danstruthers. Use it as a reference, and ask the author before reusing the design.
More boards in hydra-16
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k