Hydra16 Banked RAM Daughter Card
danstruthers·hydra-16·board/MemoryDaughterCard/MemDaughterCard.kicad_pcb
About the Hydra16 Banked RAM Daughter Card PCB
Hydra16 Banked RAM Daughter Card is an open source PCB design by danstruthers, published on GitHub. It is a 2-layer board measuring 87 × 67 mm, with 13 components from 6 distinct parts.
Other key parts include the HM628512LFP-7 and 74HC139. By type, the board carries 5 ICs, 5 capacitors and 3 connectors.
It belongs with the retro computing and usb & debug tools designs in this gallery.
From the project
6502-based multi-tasking hardware and software project
A multitasking 65C02 computer and its operating system, HydraOS.
The Hydra-16's hardware gives each of 16 tasks its own 32K of RAM, zero page and stack included, with its own RAM and ROM bank selections, so a task switch is one register write. HydraOS runs on it, Plan 9's way: One kernel in the BIOS ROM: a preemptive scheduler, one interrupt path, notes, memory and banks, and a jump table made from a specification. Everything else is a module of the paged ROM, run in place in a task of its own. A base to build on: the kernel, a serial console driver, the kernel's devices and Woz's monitor…
Main components on the Hydra16 Banked RAM Daughter Card
Hydra16 Banked RAM Daughter Card bill of materials (BOM)
13 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | HM628512LFP-7 HM628512LP-7 | DIP-32_W15.24mm_Socket_LongPads | IC1, IC2, IC3, IC4 |
| 1 | 74HC139 | DIP-16_W7.62mm | U1 |
| 1 | Conn_01x32 | PinHeader_1x32_P2.54mm_Vertical | J1 |
| 1 | Conn_01x24 | PinHeader_1x24_P2.54mm_Vertical | J2 |
| 1 | E D C B A 9 8 7 6 5 4 3 2 1 0 | PinHeader_2x15_P2.54mm_Vertical | J3 |
| 5 | .1uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5 |
Hydra16 Banked RAM Daughter Card design files
The KiCad project lives in the danstruthers/hydra-16 repository on GitHub; these links point at the commit this page was built from.
Hydra16 Banked RAM Daughter Card: common questions
How big is the Hydra16 Banked RAM Daughter Card PCB?
The Hydra16 Banked RAM Daughter Card measures 87 × 67 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hydra16 Banked RAM Daughter Card?
13 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hydra16 Banked RAM Daughter Card design files?
From the danstruthers/hydra-16 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hydra16 Banked RAM Daughter Card design in my own project?
The repository has no license, so all rights stay with danstruthers. Use it as a reference, and ask the author before reusing the design.
More boards in hydra-16
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k