Kicad WIFI CAN YG YEK
About the Kicad WIFI CAN YG YEK PCB
Kicad WIFI CAN YG YEK is an open source ESP32 PCB design by Darkzveller, published on GitHub. It is a 2-layer board measuring 48 × 28 mm, with 17 components from 16 distinct parts.
Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. Other key parts include the MCP2562FDT-E/SN. By type, the board carries 11 connectors, 2 ICs, 2 jumpers and 2 capacitors.
It belongs with the iot & wireless designs in this gallery.
Main components on the Kicad WIFI CAN YG YEK
Kicad WIFI CAN YG YEK bill of materials (BOM)
17 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2562FDT-E/SN | _ProgramData_Altium_Altium Designer {91CCA5E7-F8A9-4A8E-AA86-1D88F44FA42C}_VaultsFileCache_B7D15EC3-160A-466F-A46C-7801FE6295A7_FB88017A-93AF-48E0-A4ED-AC0901C9B691_Released_FP-C04-057-SN-IPC_A.PcbLib_FP-C04-057-SN-IPC_A | U1 |
| 1 | ESP32-DEVKITC-32D | MODULE_ESP32-DEVKITC-32D | U2 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Encoder | SEEED_110990030 | J2 |
| 1 | I2C (+3.3V) | SEEED_110990030 | J3 |
| 1 | Herkulex | TE_292161-4 | J4 |
| 1 | + Hx - | Autocom2 | J5 |
| 1 | Servo | Autocom3 | J6 |
| 1 | +5V | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | +3.3V | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | 13 4 | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Sharp | Autocom3 | J10 |
| 1 | GND | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | 7-188275-8 CAN1 | MM 8 CMS F | JP1 |
| 1 | 7-188275-8 CAN2 | MM 8 CMS F | JP2 |
| 2 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
Kicad WIFI CAN YG YEK design files
The KiCad project lives in the Darkzveller/Kicad_WIFI_CAN_YG_YEK repository on GitHub; these links point at the commit this page was built from.
- LayoutWifiCAN.kicad_pcb
- SchematicWifiCAN.kicad_sch
Kicad WIFI CAN YG YEK: common questions
What microcontroller does the Kicad WIFI CAN YG YEK use?
The Kicad WIFI CAN YG YEK is built around the ESP32-DEVKITC-32D, from the ESP32 family.
How big is the Kicad WIFI CAN YG YEK PCB?
The Kicad WIFI CAN YG YEK measures 48 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad WIFI CAN YG YEK?
17 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad WIFI CAN YG YEK design files?
From the Darkzveller/Kicad_WIFI_CAN_YG_YEK repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicad WIFI CAN YG YEK design in my own project?
The repository has no license, so all rights stay with Darkzveller. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kicad WIFI CAN YG YEK without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k