Sweepv2 plate
About the Sweepv2 plate PCB
Sweepv2 plate is an open source PCB design by davidphilipbarr, published on GitHub under the SHL-2.1 license. It is a 2-layer board measuring 105 × 86.9 mm, with 17 components from 1 distinct parts.
It belongs with the keyboards designs in this gallery.
From the project
Sweep - a small promicro based keyboard inspired by the Ferris.
This is the main Choc v1 board we all know and love.
To order the PCB the following settings are recommended1,2:
1: Settings are for JLCPCB, but could work for other manufacturers.
2: Settings are taken from Kyek's video guide.
Sweepv2 plate bill of materials (BOM)
17 components, 1 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 17 | SW_Push | SW_PG1350_cut | SW2, SW3, SW4, SW5, SW6, SW8, SW9, SW10 +9 |
Sweepv2 plate design files
The KiCad project lives in the davidphilipbarr/Sweep repository on GitHub; these links point at the commit this page was built from.
Sweepv2 plate: common questions
How big is the Sweepv2 plate PCB?
The Sweepv2 plate measures 105 × 86.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sweepv2 plate?
17 components, from 1 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sweepv2 plate design files?
From the davidphilipbarr/Sweep repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sweepv2 plate design in my own project?
It is published under SHL-2.1, which limits how it may be reused; read the license before building on it.
More boards in Sweep
Sweepbling lp
216.9 × 86.9 mm46 parts2LSHL-2.12.1k
Sweep high
229.5 × 95.2 mm42 parts2LSHL-2.12.1k
Sweepv2
216.9 × 86.9 mm40 parts2LSHL-2.12.1k
Sweep bling mx
113.5 × 95.2 mm22 parts2LSHL-2.12.1k
Ferris Sweep Compact
107.2 × 86.9 mm20 parts2LSHL-2.12.1k
Half swept
109 × 86.9 mm20 parts2LSHL-2.12.1k
Sweep high plate
112.1 × 95.2 mm17 parts2LSHL-2.12.1k
Sweep bling mx plate
111.6 × 95.2 mm17 parts2LSHL-2.12.1k
byrantech
google