Oscar components
dchwebb·Oscar·Hardware_v3/oscar_components.kicad_pcb
About the Oscar components PCB
Oscar components is an open source STM32 PCB design by dchwebb, published on GitHub under the Unlicense license. It is a 4-layer board measuring 71 × 100 mm, with 63 components from 40 distinct parts.
Its main chip is the STM32F446RETX, from the STM32 family. Other key parts include the LT1117-3.3, ILI9341_SPI_DAUGHTERBOARD, TL074, MCP6004 and H11L1. By type, the board carries 20 resistors, 15 capacitors, 9 connectors, 6 ICs, 4 switches and 4 diodes.
It belongs with the audio, test & measurement and displays & leds designs in this gallery.
From the project
Eurorack 3 Channel Oscilloscope based on ARM STM32F446 MCU
Oscar is a three channel oscilloscope, tuner, spectrum analyser and MIDI event viewer designed for use in a Eurorack modular synthesiser.
Version 3 changes: - Optimised for DIY building - Build Guide - Bill of Materials - Illuminated buttons for quick channel selection - USB input for firmware updates and USB MIDI analysis - An opto-coupler and passive mult on the serial MIDI input - Dedicated Menu button

Main components on the Oscar components
Oscar components bill of materials (BOM)
63 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ILI9341_SPI_DAUGHTERBOARD ILI9341_SPI_Daughterboard | ILI9341_SPI_daughterboard_v2 | U2 |
| 1 | STM32F446RETX STM32F446RETx | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | TL074 | SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | MCP6004 | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | H11L1 | H11L1 | U6 |
| 1 | 8MHZ 8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm_Large_Pads | Y1 |
| 1 | ChannelC_In | THONKICONN_hole | J3 |
| 1 | ChannelA_In | THONKICONN_hole | J4 |
| 1 | ChannelB_In | THONKICONN_hole | J5 |
| 1 | ChC_Buff_Out | THONKICONN_hole | J6 |
| 1 | ChA_Buff_Out | THONKICONN_hole | J7 |
| 1 | ChB_Buff_Out | THONKICONN_hole | J8 |
| 1 | MIDI_IN | Thonkiconn_Stereo-PJ366ST | J9 |
| 1 | MIDI_THROUGH | Thonkiconn_Stereo-PJ366ST | J10 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_Amphenol_12401951E412A | J11 |
| 1 | Reset_Button | SW_PUSH_6mm_aligned | SW1 |
| 1 | Menu_Button | SW_PUSH_6mm_aligned | SW2 |
| 1 | Left_Encoder | Encoder | SW3 |
| 1 | Right_Encoder | Encoder | SW4 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ChA_Btn | Low_Profile_LED_Button | BTN1 |
| 1 | ChB_Btn | Low_Profile_LED_Button | BTN2 |
| 1 | ChC_Btn | Low_Profile_LED_Button | BTN3 |
| 2 | 1N5819 | D_SOD-123 | D1, D2 |
| 1 | 1N4148W | D_SOD-123 | D3 |
| 1 | RCLAMP0502B | SOT-416 | D4 |
| 1 | C1017 L | R_0805_2012Metric | L1 |
| 4 | 4.7UF 4.7uF | C_0805_2012Metric | C1, C9, C11, C15 |
| 2 | 22UF 22uF | CP_Elec_4x5.8 | C2, C8 |
| 6 | 100NF 100nF | C_0805_2012Metric | C3, C6, C7, C10, C12, C13 |
| 2 | 30PF 30pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 1 | 1UF 1uF | C_0805_2012Metric | C14 |
| 1 | 150 | R_0805_2012Metric | R1 |
| 6 | 100K 100k | R_0805_2012Metric | R2, R3, R4, R5, R6, R7 |
| 3 | 15K 15k | R_0805_2012Metric | R8, R9, R10 |
| 2 | C23162 10k | R_0805_2012Metric | R11, R12 |
| 3 | 100 | R_0805_2012Metric | R13, R14, R15 |
| 1 | 220 | R_0805_2012Metric | R16 |
| 1 | 470 | R_0805_2012Metric | R17 |
| 3 | C23162 1.5k | R_0805_2012Metric | R18, R19, R20 |
Oscar components design files
The KiCad project lives in the dchwebb/Oscar repository on GitHub; these links point at the commit this page was built from.
Oscar components: common questions
What microcontroller does the Oscar components use?
The Oscar components is built around the STM32F446RETX, from the STM32 family.
How big is the Oscar components PCB?
The Oscar components measures 71 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Oscar components?
63 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Oscar components design files?
From the dchwebb/Oscar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Oscar components design in my own project?
Yes, under the terms of its Unlicense license, which dchwebb chose for the repository.
Can I test firmware for the Oscar components without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Oscar
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k