Drishtikon
About the Drishtikon PCB
Drishtikon is an open source PCB design by Debanx3, published on GitHub under the MIT license. It is a 2-layer board measuring 60.6 × 46.8 mm, with 13 components from 8 distinct parts.
By type, the board carries 3 fuses, 2 connectors and 2 capacitors.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
EdgeAI based human detection system for automated control of resistive and inductive loads at workspaces
+ The beginnings: Drishtikon is a framework consisting of two modules, the mainboard and the controller modules that can be powered directly from the 220VAC mains in dorms, libraries and canteens. The two boards communicate with each other using a BLE protocol and the mainboard is connected to the internet via Wi-Fi, it connects to the local network using hard coding.
Drishtikon bill of materials (BOM)
13 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3, J4 |
| 2 | Fuse | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1, F3 |
| 1 | Fuse | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | F2 |
| 4 | ~ | Hole, 3mm | H18, H19, H20, H21 |
| 1 | HLK-PM01 | Converter_ACDC_Hi-Link_HLK-PMxx | PS3 |
| 1 | Varistor | RV_Disc_D12mm_W3.9mm_P7.5mm | RV1 |
| 1 | 10UF 10uF | CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 1PF 22uF | CP_Radial_D8.0mm_P3.50mm | C2 |
Drishtikon design files
The KiCad project lives in the Debanx3/Drishtikon repository on GitHub; these links point at the commit this page was built from.
Drishtikon: common questions
How big is the Drishtikon PCB?
The Drishtikon measures 60.6 × 46.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Drishtikon?
13 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Drishtikon design files?
From the Debanx3/Drishtikon repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Drishtikon design in my own project?
Yes, under the terms of its MIT license, which Debanx3 chose for the repository.
More boards in Drishtikon
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k