HardLabs

RC2014-FDC-V22

dennisperry·RC2014_PCBs·RC2014-FDC-V22/RC2014-FDC-V22.kicad_pcb

RC2014-FDC-V22 PCB layout, top view — open source board by dennisperry

About the RC2014-FDC-V22 PCB

RC2014-FDC-V22 is an open source PCB design by dennisperry, published on GitHub. It is a 2-layer board measuring 104 × 37.5 mm, with 15 components from 10 distinct parts.

Other key parts include the 74HCT32D, SN74LVC2G14DBV, 74HCT138D, WD37C65 and TI74LVC1G240DBV. By type, the board carries 6 capacitors, 5 ICs, 2 connectors, 1 crystal and 1 resistor.

From the project

A group of RC2014 PCBs I've designed to expand my system

I've used SMT on pretty much all the boards. In my professional life I've done a lot of work with SMT and don't find it that difficult. I'd recommend some solder paste and a hot air setup along with a good soldering iron, a flux pen and various sizes of solder wick. I've converted a toaster oven into a reflow oven for when I'm doing more that one unit builds. This route requires you purchase a solder paste stencil with your PCBs.

RC2014-FDC-V22, from the project README
From the project README

Main components on the RC2014-FDC-V22

74HCT32DSN74LVC2G14DBV74HCT138DWD37C65TI74LVC1G240DBV

RC2014-FDC-V22 bill of materials (BOM)

15 components, 10 distinct parts.

QtyPartRefs
1
74HCT32D
U1
1
SN74LVC2G14DBV
U2
1
74HCT138D
U3
1
WD37C65
U4
1
TI74LVC1G240DBV
U5
1
ASV-16MHz
Y1
1
Conn_01x40
J1
1
Conn_02x17_Odd_Even
J2
6
0.1uF
C1, C2, C3, C4, C5, C6
1
1K x 5
RN1

RC2014-FDC-V22 design files

The KiCad project lives in the dennisperry/RC2014_PCBs repository on GitHub; these links point at the commit this page was built from.

RC2014-FDC-V22: common questions

How big is the RC2014-FDC-V22 PCB?

The RC2014-FDC-V22 measures 104 × 37.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RC2014-FDC-V22?

15 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the RC2014-FDC-V22 design files?

From the dennisperry/RC2014_PCBs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RC2014-FDC-V22 design in my own project?

The repository has no license, so all rights stay with dennisperry. Use it as a reference, and ask the author before reusing the design.

More boards in RC2014_PCBs