HardLabs

RC2014-512K-RAMROM-V2

dennisperry·RC2014_PCBs·RC2014-512K-RAMROM-V2/RC2014-512K-RAMROM-V2.kicad_pcb

RC2014-512K-RAMROM-V2 PCB layout, top view — open source board by dennisperry

About the RC2014-512K-RAMROM-V2 PCB

RC2014-512K-RAMROM-V2 is an open source PCB design by dennisperry, published on GitHub. It is a 2-layer board measuring 104 × 46 mm, with 16 components from 9 distinct parts.

Other key parts include the 74LVC139D, SST39SF040, 74HCT138, AS6C4008-55PCN and 74LVC1G74DCT. By type, the board carries 7 ICs, 7 capacitors, 1 connector and 1 resistor.

From the project

A group of RC2014 PCBs I've designed to expand my system

I've used SMT on pretty much all the boards. In my professional life I've done a lot of work with SMT and don't find it that difficult. I'd recommend some solder paste and a hot air setup along with a good soldering iron, a flux pen and various sizes of solder wick. I've converted a toaster oven into a reflow oven for when I'm doing more that one unit builds. This route requires you purchase a solder paste stencil with your PCBs.

RC2014-512K-RAMROM-V2, from the project README
From the project README

Main components on the RC2014-512K-RAMROM-V2

74LVC139DSST39SF04074HCT138AS6C4008-55PCN74LVC1G74DCT74LS670

RC2014-512K-RAMROM-V2 bill of materials (BOM)

16 components, 9 distinct parts.

QtyPartRefs
1
74LVC139D
U1
1
SST39SF040
U2
1
74HCT138
U3
1
AS6C4008-55PCN
U4
1
74LVC1G74DCT
U5
2
74LS670
U6, U7
1
Conn_01x40
J1
7
0.1uF
C1, C2, C3, C4, C5, C6, C7
1
~
RN1

RC2014-512K-RAMROM-V2 design files

The KiCad project lives in the dennisperry/RC2014_PCBs repository on GitHub; these links point at the commit this page was built from.

RC2014-512K-RAMROM-V2: common questions

How big is the RC2014-512K-RAMROM-V2 PCB?

The RC2014-512K-RAMROM-V2 measures 104 × 46 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RC2014-512K-RAMROM-V2?

16 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the RC2014-512K-RAMROM-V2 design files?

From the dennisperry/RC2014_PCBs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RC2014-512K-RAMROM-V2 design in my own project?

The repository has no license, so all rights stay with dennisperry. Use it as a reference, and ask the author before reusing the design.

More boards in RC2014_PCBs