4 open source boards using the WD37C65
Real designs built with the WD37C65, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
.C68
ProbablyNotArtyom
214 × 170 mm184 parts4LGPL-2.051Fdc800jwd
codepainters
91 × 115.3 mm49 parts2LNo license0PIC
Copy
ProbablyNotArtyom
214 × 170 mm184 parts4LGPL-2.051RC2014-FDC-V22
dennisperry
104 × 37.5 mm15 parts2LNo license0
The WD37C65 in open source designs
The gallery holds 4 open source boards using the WD37C65 from 3 GitHub repositories; a typical one measures about 159 × 142.7 mm and carries around 117 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is .C68 by ProbablyNotArtyom.
Microcontrollers on boards using the WD37C65
WD37C65: common questions
Where can I find a WD37C65 reference design?
Each of the 4 boards on this page is a real design using the WD37C65. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the WD37C65 use?
Most are built on PIC (2).
How big is a typical board using the WD37C65?
The median is 159 × 142.7 mm, and 50% are two-layer designs.
What is the most popular open source board using the WD37C65?
By GitHub stars, .C68 by ProbablyNotArtyom, with 51 stars.
Can I simulate one of these boards using the WD37C65 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.