HardLabs

RC2014-RAM-ROM-NoBanking

dennisperry·RC2014_PCBs·RC2014-RAM-ROM-NoBanking/RC2014-RAM-ROM-NoBanking.kicad_pcb

RC2014-RAM-ROM-NoBanking PCB layout, top view — open source board by dennisperry

About the RC2014-RAM-ROM-NoBanking PCB

RC2014-RAM-ROM-NoBanking is an open source PCB design by dennisperry, published on GitHub. It is a 2-layer board measuring 104 × 69 mm, with 38 components from 12 distinct parts.

Other key parts include the 74LS156, 74HCT1G32, SST39SF040, CY62128Exx-xxS and SN74LVC2G14DBV. By type, the board carries 17 connectors, 7 ICs, 7 capacitors, 5 resistors, 1 battery holder and 1 switch.

From the project

A group of RC2014 PCBs I've designed to expand my system

I've used SMT on pretty much all the boards. In my professional life I've done a lot of work with SMT and don't find it that difficult. I'd recommend some solder paste and a hot air setup along with a good soldering iron, a flux pen and various sizes of solder wick. I've converted a toaster oven into a reflow oven for when I'm doing more that one unit builds. This route requires you purchase a solder paste stencil with your PCBs.

RC2014-RAM-ROM-NoBanking, from the project README
From the project README

Main components on the RC2014-RAM-ROM-NoBanking

74LS15674HCT1G32SST39SF040CY62128Exx-xxSSN74LVC2G14DBVDS1210

RC2014-RAM-ROM-NoBanking bill of materials (BOM)

38 components, 12 distinct parts.

QtyPartRefs
2
74LS156
U1, U2
1
74HCT1G32
U3
1
SST39SF040
U4
1
CY62128Exx-xxS
U5
1
SN74LVC2G14DBV
U6
1
DS1210
U7
1
Conn_01x40
J1
16
Conn_01x03
J2, J3, J4, J5, J6, J7, J8, J9 +8
1
Battery_Cell
BT1
1
SW_DIP_x03
SW1
7
0.1uF
C1, C2, C3, C4, C5, C6, C7
5
2.2k
R1, R2, R3, R4, R5

RC2014-RAM-ROM-NoBanking design files

The KiCad project lives in the dennisperry/RC2014_PCBs repository on GitHub; these links point at the commit this page was built from.

RC2014-RAM-ROM-NoBanking: common questions

How big is the RC2014-RAM-ROM-NoBanking PCB?

The RC2014-RAM-ROM-NoBanking measures 104 × 69 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RC2014-RAM-ROM-NoBanking?

38 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the RC2014-RAM-ROM-NoBanking design files?

From the dennisperry/RC2014_PCBs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RC2014-RAM-ROM-NoBanking design in my own project?

The repository has no license, so all rights stay with dennisperry. Use it as a reference, and ask the author before reusing the design.

More boards in RC2014_PCBs