Ai circuit design tests
About the Ai circuit design tests PCB
Ai circuit design tests is an open source PCB design by devbisme, published on GitHub. It is a board, with 243 components from 63 distinct parts.
Other key parts include the USBLC6-2SC6, TPS22919DCKR, AP62200TWU-7, TPS73633DBVR and TLV2372IDR. By type, the board carries 141 capacitors, 61 resistors, 23 ICs, 6 diodes, 6 inductors and 4 connectors.
From the project
Tests of KiCad-related AI tools.
Second run of the run-5 prompt. It produced the most thoroughly verified design so far and also the most expensive complete run. The architecture differs from runs 5 and 7: two separate ADCs, a Xilinx FPGA, external SDRAM and an FX2LP bridge.
- Dates: 2026-09-21 15:11 → 2026-09-22 10:28 - Tool: SKiDL Skills plugin (pipeline state v5.1), Claude Code v2.1.278, Opus 5 (Claude Pro), SKiDL 3.0.0, KiCad 9 - Prompt: dual-adc-prompt.txt — identical to runs 5, 7 and 8 - Transcript: claudetranscript.txt` (210 KB, the largest; most of the bulk is subagent hand-back reports quoted in full)
Main components on the Ai circuit design tests
Ai circuit design tests bill of materials (BOM)
243 components, 63 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | TPS22919DCKR | SOT-363_SC-70-6 | U2 |
| 2 | AP62200TWU-7 | TSOT-23-6 | U3, U4 |
| 2 | TPS73633DBVR | SOT-23-5 | U5, U6 |
| 1 | TLV2372IDR | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | SN74LVC1G17DBVR | SOT-23-5 | U8 |
| 1 | XC6SLX9-2TQG144C | LQFP-144_20x20mm_P0.5mm | U30 |
| 1 | W25Q32JVSSIQ | SOIC-8_5.3x5.3mm_P1.27mm | U31 |
| 1 | W9825G6KH-6I | TSOP-II-54_22.2x10.16mm_P0.8mm | U40 |
| 1 | CY7C68013A-56LTXC | QFN-56-1EP_8x8mm_P0.5mm_EP5.6x5.6mm | U50 |
| 1 | 24LC64-I/SN | SOIC-8_3.9x4.9mm_P1.27mm | U51 |
| 6 | TPH2501-TR | SOT-23-5 | U100, U101, U102, U200, U201, U202 |
| 2 | THS4521IDR | SOIC-8_3.9x4.9mm_P1.27mm | U103, U203 |
| 2 | AD9237BCPZ-40 | QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm | U150, U250 |
| 1 | OXETDLJANF-10.000000 | Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | 24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C-16PIN-2MD(073) | USB_C_Receptacle_TYPE-C-16P-2MD073 | J1 |
| 2 | KH-BNC50-3511 | BNC_KH-BNC50-3511_Horizontal | J2, J3 |
| 1 | JTAG 2x3 1.27mm | PinHeader_2x03_P1.27mm_Vertical_SMD | J4 |
| 1 | GREEN | LED_0603_1608Metric | D30 |
Show 43 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RED | LED_0603_1608Metric | D31 |
| 2 | BAV199LT1G | SOT-23 | D100, D200 |
| 2 | ESD9L5.0ST5G | D_SOD-923 | D101, D201 |
| 4 | 600R@100MHz | L_0805_2012Metric | FB1, FB2, FB3, FB4 |
| 1 | 3.3uH | L_Changjiang_FNR4030S | L1 |
| 1 | 2.2uH | L_Changjiang_FNR4020S | L2 |
| 82 | 100nF | C_0402_1005Metric | C1, C10, C13, C22, C23, C24, C25, C26 +74 |
| 6 | 22uF | C_0805_2012Metric | C2, C3, C18, C19, C20, C21 |
| 19 | 10uF | C_0805_2012Metric | C11, C14, C35, C36, C78, C90, C91, C111 +11 |
| 4 | 1uF | C_0603_1608Metric | C12, C15, C16, C17 |
| 1 | 330nF | C_0402_1005Metric | C32 |
| 3 | 22pF | C_0402_1005Metric | C34, C106, C206 |
| 10 | 4.7uF | C_0805_2012Metric | C60, C61, C62, C63, C64, C65, C66, C67 +2 |
| 2 | 12pF | C_0402_1005Metric | C92, C93 |
| 2 | 22pF | C_0603_1608Metric | C100, C200 |
| 2 | 200pF | C_0603_1608Metric | C101, C201 |
| 2 | 270pF | C_0603_1608Metric | C102, C202 |
| 2 | 220pF | C_0603_1608Metric | C103, C203 |
| 2 | 680pF | C_0603_1608Metric | C104, C204 |
| 2 | 100pF | C_0603_1608Metric | C105, C205 |
| 2 | 10pF | C_0603_1608Metric | C116, C216 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
| 3 | 100k | R_0402_1005Metric | R3, R18, R52 |
| 1 | 33.2k | R_0402_1005Metric | R10 |
| 5 | 10.0k | R_0402_1005Metric | R11, R13, R14, R16, R17 |
| 1 | 5.76k | R_0402_1005Metric | R12 |
| 1 | 12.1k | R_0402_1005Metric | R15 |
| 1 | 22R | R_0402_1005Metric | R19 |
| 6 | 33R | R_0402_1005Metric | R21, R23, R111, R112, R211, R212 |
| 1 | 100R | R_0402_1005Metric | R22 |
| 4 | 4.7k | R_0402_1005Metric | R30, R34, R36, R37 |
| 8 | 10k | R_0402_1005Metric | R31, R38, R39, R53, R54, R55, R150, R250 |
| 2 | 1k | R_0603_1608Metric | R32, R33 |
| 1 | 330 | R_0402_1005Metric | R35 |
| 1 | 22 | R_0402_1005Metric | R40 |
| 2 | 2.2k | R_0402_1005Metric | R50, R51 |
| 2 | 909k | R_0805_2012Metric | R100, R200 |
| 2 | 90.9k | R_0603_1608Metric | R101, R201 |
| 2 | 1.00k | R_0603_1608Metric | R102, R202 |
| 4 | 147R | R_0402_1005Metric | R103, R104, R203, R204 |
| 4 | 137R | R_0402_1005Metric | R105, R106, R205, R206 |
| 4 | 1.00k | R_0402_1005Metric | R107, R109, R207, R209 |
| 4 | 1.10k | R_0402_1005Metric | R108, R110, R208, R210 |
Ai circuit design tests design files
The KiCad project lives in the devbisme/ai-circuit-design-tests repository on GitHub; these links point at the commit this page was built from.
Ai circuit design tests: common questions
How many components are on the Ai circuit design tests?
243 components, from 63 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ai circuit design tests design files?
From the devbisme/ai-circuit-design-tests repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.
Can I use the Ai circuit design tests design in my own project?
The repository has no license, so all rights stay with devbisme. Use it as a reference, and ask the author before reusing the design.