55 open source boards using the SN74LVC1G17DBVR
Real designs built with the SN74LVC1G17DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Moto gps rev a1
mx3353672833-debug
52 × 52 mm95 parts4LCustom license320RP2040/RP2350
PD240W
theohg
66 × 66 mm213 parts6LCC-BY-NC-4.0125Raspberry Pi
Pintry
icamaster
100 × 100 mm166 parts4LMIT26Accumulator Board
formulaslug
127 × 91.5 mm102 parts2LNo license5- schematic only · 243 parts
Ai circuit design tests
devbisme
243 partsNo license2 STM32
Bldc esc
EwoudVV
544 × 768 mm421 parts4LNo license1Channel Monitor C1
AnishLanka
180 × 145 mm137 parts2LNo license1Water controller
igorilla666
160 × 110 mm117 parts2LCERN-OHL-S-2.01ESP32
Integrated
hicancan
100 × 85 mm99 parts4LAGPL-3.01HERON
Austin-Hunter1
84 × 56 mm95 parts4LNo license1ESP32
Glove v4-routing candidate
latintzar
100 × 80 mm561 parts8LMIT0Project ATO / Supervision
pratham-cloud-ctrl
300 × 250 mm479 parts4LCustom license0STM32
Pd1180-epr
techmannih
85.9 × 85.9 mm255 parts4LNo license0ESP32
Handset
JeremyLakeyJr
66 × 142 mm217 parts4LNo license0Airgrep
mp911de
105 × 95 mm175 parts4LNo license0FPGA
Zx50 MemoryCard RevC1
mmosko
132.1 × 108 mm172 parts6LNo license0Ax7010 servo reva
magic-alt
130 × 95 mm157 parts2LNo license0RP2040/RP2350
MatrixDrive
Matrixite
100 × 65 mm143 parts8LNo license0FPGA
Amiga scandoubler v030wip
110-kenichi
95 × 95 mm139 parts4LNo license0ESP32
Moto gps rev a1
tang003
52 × 52 mm95 parts4LCustom license0A1-4RD
mkol-ME
120 × 94 mm93 parts4LMIT0PIC
T20260928 PCB TEST
jamyang838
100 × 75 mm87 parts2LNo license0ESP32
Hardware esp32-ethernet
dnd-global
80 × 66 mm73 parts2LNo license0Panel
da1sh1n
273 × 119.9 mm72 parts4LCC-BY-NC-4.00ESP32
ESPFC-WHOOP-
Athul24milu
40 × 40 mm71 parts4LNo license0ESP32
Sensor Interface & Power Management Board for ESP32
AJC938
90 × 64 mm52 parts2LMIT0ESP32
Smart park design
RAJ-IITROORKEE
62 × 50 mm24 parts2LNo license0Minuet Light Accessory
brown-studios
30 × 30 mm15 parts2LMIT65RP2040/RP2350
Helios
formicidae-tracker
84 × 60 mm119 parts2LNo license1ESP32
Integrated power baseline
hicancan
100 × 85 mm99 parts4LAGPL-3.01ESP32
Glove v4-placement
latintzar
100 × 80 mm560 parts6LMIT0NXP
Arena 12-12 Teensy Modular LED Display
floesche
228.6 × 228.6 mm441 parts6LCC-BY-4.00Before
magic-alt
130 × 95 mm153 parts2LNo license0FPGA
Amiga scandoubler analog
110-kenichi
95 × 95 mm135 parts4LNo license0FPGA
Zx50 Cpu RevC4
mmosko
133.5 × 100.3 mm85 parts6LNo license0Left
da1sh1n
137.5 × 109.3 mm65 parts4LCC-BY-NC-4.00
How designs wire the SN74LVC1G17DBVR
Read from the KiCad layouts of 34 open source designs, one per repository: what each pin of the SN74LVC1G17DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 24 of 33 designs, most often 100 nF (then 2.2 µF).
- The A pin has a series resistor on 17 of 33 designs, most often 10 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 100% | — |
| Apin 2 | Connected to: A connector 21% |
|
| GNDpin 3 | Connected to: GND 94% | — |
| VCCpin 5 | Connected to: 3.3V 82% · a signal 18% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Moto gps rev a1 by mx3353672833-debug, PD240W by theohg, Minuet Light Accessory by brown-studios and Pintry by icamaster.
The SN74LVC1G17DBVR in open source designs
The gallery holds 55 open source boards using the SN74LVC1G17DBVR from 35 GitHub repositories; a typical one measures about 95 × 95 mm and carries around 135 components.
72% use four copper layers or more, and 29% carry an open source license.
The most starred is Moto gps rev a1 by mx3353672833-debug.
Parts used alongside the SN74LVC1G17DBVR
What boards using the SN74LVC1G17DBVR are built for
SN74LVC1G17DBVR: common questions
Where can I find a SN74LVC1G17DBVR reference design?
Each of the 55 boards on this page is a real design using the SN74LVC1G17DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1G17DBVR VCC pin?
The VCC pin has a decoupling capacitor on 24 of 33 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 34 open source designs using the SN74LVC1G17DBVR.
What resistor goes on the SN74LVC1G17DBVR A pin?
The A pin has a series resistor on 17 of 33 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 34 open source designs using the SN74LVC1G17DBVR.
What parts are used alongside the SN74LVC1G17DBVR?
The SN74LVC1G08DBVR, SN74LVC1G74DCUR, TPS63070RNMR, TUSB320LAIRWBR and SN74LVC1G04DBVR appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G17DBVR use?
Most are built on ESP32 (14), FPGA (13), RP2040/RP2350 (3) and STM32 (2).
How big is a typical board using the SN74LVC1G17DBVR?
The median is 95 × 95 mm, and 28% are two-layer designs.
What is the most popular open source board using the SN74LVC1G17DBVR?
By GitHub stars, Moto gps rev a1 by mx3353672833-debug, with 320 stars.
Can I simulate one of these boards using the SN74LVC1G17DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.