125 open source boards using the W25Q32JVSSIQ
Real designs built with the W25Q32JVSSIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Pslab mini hardware
fossasia
85 × 56 mm154 parts4LApache-2.01.2kESP32
Nest mini drop in
iMike78
74.5 × 70.6 mm243 parts4LCERN-OHL-S-2.0598ESP32
Home mini v1-drop in
iMike78
72.4 × 70 mm223 parts4LCERN-OHL-S-2.0408ESP32
DropBear
speeduino
116.1 × 98 mm196 parts2LNo license282FPGA
NB3 Hindbrain
NoBlackBoxes
57 × 22.5 mm145 parts4LCC-BY-NC-4.066FPGA
Hackrf pro
greatscottgadgets
120 × 75 mm503 parts6LCERN-OHL-P-2.063RP2040/RP2350
Pico2-ice
tinyvision-ai-inc
27.9 × 63.5 mm97 parts4LMIT59Caravel-Nucleo v2-M.2
efabless
73.4 × 92.5 mm90 parts2LNo license40RP2040/RP2350
Mitayi-Pico-D1
CIRCUITSTATE
51 × 21 mm51 parts2LMIT36FPGA
TT04+ FPGA ASIC Simulator
TinyTapeout
45 × 52.5 mm77 parts4LApache-2.021FPGA
Fpga.play.pub
electronut
32 × 63.8 mm67 parts4LNo license21RP2040/RP2350
RTShield
o7-machinehum
89 × 61 mm87 parts4LCC-BY-NC-4.012RP2040/RP2350
KiExport
vishnumaiea
51 × 21 mm51 parts2LNo license12RP2040/RP2350
Tt123-demo
TinyTapeout
104.5 × 81 mm89 parts2LApache-2.011RP2040/RP2350
Spasics
psychogenic
45 × 30 mm66 parts4LGPL-3.010Caravel mvp
TinyTapeout
39 × 54 mm55 parts4LApache-2.08Nerves system underglow3
ConnorRigby
81.2 × 100.2 mm200 parts4LApache-2.06ESP32
ESP32 BASED PCB
BitwiseAjeet
98 × 55.5 mm81 parts4LMIT6FABulous board
FPGA-Research
101.2 × 63.5 mm75 parts4LApache-2.06ESP32
ESP32-D0WD-V3-ControlStand-V0-0
RobertPHeller
34.5 × 23.1 mm166 parts2LGPL-3.03RP2040/RP2350
AmogusRP2040
alx-alexpark
68.8 × 88.4 mm42 parts2LNo license3STM32
Kicad-BLACKPILL-STM32F401CCU6
deep002993
86.2 × 85.1 mm36 parts2LNo license3ESP32
Slate113-mk1
xeno3dev
96.7 × 67.8 mm609 parts8LCC-BY-NC-4.02RP2040/RP2350
PortaRe0
0Re0-8192
135 × 77 mm349 parts6LNo license2FLEADiP
dennowiggle
100 × 72 mm189 parts4LLGPL-2.12RP2040/RP2350
Chipignite discover
efabless
53.5 × 65.5 mm139 parts4LApache-2.02RP2040/RP2350
Greyhound main
mole99
84 × 78 mm106 parts4LApache-2.02RP2040/RP2350
Waferspace main
mole99
84 × 78 mm105 parts4LApache-2.02FPGA
Morphcpu
ranveerlabs
70 × 70 mm80 parts4LAGPL-3.02- schematic only · 243 parts
Ai circuit design tests
devbisme
243 partsNo license2 STM32
Hub
Bruhdows
148 × 78 mm309 parts4LNo license1ESP32
Nest mini v2-voice
marceldale
74.5 × 70.6 mm231 parts4LCERN-OHL-S-2.01Caravel-Nucleo v2-M.2
chipfoundry
73.4 × 92.5 mm90 parts2LNo license1Caravel-Nucleo v2-M.2
weyer7
73.4 × 92.5 mm90 parts2LNo license1ESP32
ESP32 IoT Dev Board
EngMeesh
82.9 × 53.8 mm85 parts4LMIT1ESP32
Iot esp32-hw
sourabh-devrukhkar
89.9 × 52.8 mm85 parts4LMIT1
How designs wire the W25Q32JVSSIQ
Read from the KiCad layouts of 89 open source designs, one per repository: what each pin of the W25Q32JVSSIQ connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 52 of 85 designs, most often 100 nF (then 1 µF).
- The CS pin has a pull-up to 3.3V on 44 of 89 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: The microcontroller 69% |
|
| DO(IO1)pin 2 | Connected to: The microcontroller 34% |
|
| IO2pin 3 | Connected to: The microcontroller 25% · 3.3V 36% |
|
| GNDpin 4 | Connected to: GND 93% | — |
| DI(IO0)pin 5 | Connected to: A connector 46%, the microcontroller 35% |
|
| CLKpin 6 | Connected to: A connector 48%, the microcontroller 39% |
|
| VCCpin 8 | Connected to: 3.3V 95% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pslab mini hardware by fossasia, Nest mini drop in pcb by iMike78, Home mini v1-drop in pcb by iMike78 and DropBear by speeduino.
The W25Q32JVSSIQ in open source designs
The gallery holds 125 open source boards using the W25Q32JVSSIQ from 90 GitHub repositories; a typical one measures about 76.2 × 63.6 mm and carries around 83 components.
62% use four copper layers or more, and 38% carry an open source license.
The most starred is Pslab mini hardware by fossasia.
Parts used alongside the W25Q32JVSSIQ
Microcontrollers on boards using the W25Q32JVSSIQ
What boards using the W25Q32JVSSIQ are built for
W25Q32JVSSIQ: common questions
Where can I find a W25Q32JVSSIQ reference design?
Each of the 125 boards on this page is a real design using the W25Q32JVSSIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W25Q32JVSSIQ VCC pin?
The VCC pin has a decoupling capacitor on 52 of 85 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 89 open source designs using the W25Q32JVSSIQ.
What pull-up resistor is used on the W25Q32JVSSIQ CS pin?
The CS pin has a pull-up to 3.3V on 44 of 89 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 89 open source designs using the W25Q32JVSSIQ.
What parts are used alongside the W25Q32JVSSIQ?
The USBLC6-2SC6, BME280, ESP32-C3-WROOM-02-H4, MAX4466EXK and CP2102N-Axx-xQFN20 appear in the most repositories here.
Which microcontrollers do boards using the W25Q32JVSSIQ use?
Most are built on ESP32 (41), RP2040/RP2350 (25), FPGA (9) and STM32 (6).
How big is a typical board using the W25Q32JVSSIQ?
The median is 76.2 × 63.6 mm, and 38% are two-layer designs.
What is the most popular open source board using the W25Q32JVSSIQ?
By GitHub stars, Pslab mini hardware by fossasia, with 1,227 stars.
Can I simulate one of these boards using the W25Q32JVSSIQ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.