8 open source boards using the CY7C68013A-56LTXC

Real designs built with the CY7C68013A-56LTXC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the CY7C68013A-56LTXC

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the CY7C68013A-56LTXC connects to, and the resistors, capacitors and other passives placed on it.

  • The AVCC pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF).
  • The XTALOUT pin has a crystal on 4 of 5 designs, most often 24 MHz.
  • The XTALOUT pin has a capacitor to GND on 4 of 5 designs, most often 9 pF (then 18 pF).
  • The XTALIN pin has a crystal on 4 of 5 designs, most often 24 MHz.
AVCCpin 3, 7Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (19), 4.7 µF (3), 2.2 µF (3)
XTALOUTpin 4Connected to: Signal 100%
  • Crystal on 80% · 24 MHz (4)
  • Capacitor to GND on 80% · 9 pF (2), 18 pF (1), 12 pF (1)
XTALINpin 5Connected to: Signal 100%
  • Crystal on 80% · 24 MHz (4)
  • Capacitor to GND on 80% · 9 pF (2), 18 pF (1), 12 pF (1)
AGNDpin 6, 10Connected to: GND 89%
VCCpin 11, 17, 27, 32, 43, 55Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (35), 4.7 µF (6), 2.2 µF (2)
GNDpin 12, 26, 28, 41, 53, 56Connected to: GND 100%
RESERVEDpin 14Connected to: GND 100%
SCLpin 15Connected to: DAC081C081CIMK/NOPB 75%, BL24C256A-SFRC 50%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (4)
SDApin 16Connected to: DAC081C081CIMK/NOPB 75%, BL24C256A-SFRC 50%
  • Pull-up to 3.3V on 100% · 2.2 kΩ (4)
PA0/INT0pin 33Connected to: The microcontroller 50% · not connected 25% · VIO_EN 25%
  • Pull-up to 3.3V on 50% · 100 kΩ (2)
PA1/INT1pin 34Connected to: The microcontroller 75% · not connected 25%
  • Resistor to GND on 75% · 100 kΩ (2), 10 kΩ (1)
RESETpin 42Connected to: Signal 100%
  • Capacitor to GND on 75% · 1 µF (1)
  • Series resistor on 50% · 100 kΩ (2)
  • Pull-up to 3.3V on 50% · 100 kΩ (1), 2.7 kΩ (1)
WAKEUPpin 44Connected to: 3.3V 75% · a signal 25%
PD0/FD8pin 45Connected to: Signal 75% · not connected 25%
  • Resistor to GND on 75% · 10 kΩ (2), 1 kΩ (1)
  • Pull-up to VIO_EN on 50% · 10 kΩ (2)
  • Series resistor on 50% · 20 kΩ (2)
PD1/FD9pin 46Connected to: Not connected 75% · a signal 25%
PD2/FD10pin 47Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 20 kΩ (1), 2.2 kΩ (1)
PD3/FD11pin 48Connected to: Signal 75% · not connected 25%
  • Series resistor on 50% · 20 kΩ (1), 2.2 kΩ (1)
PD4/FD12pin 49Connected to: Signal 75% · not connected 25%
  • Series resistor on 75% · 2.2 kΩ (1), 20 kΩ (1), 1 kΩ (1)
PD5/FD13pin 50Connected to: Signal 75% · not connected 25%
  • Series resistor on 75% · 10 kΩ (1), 20 kΩ (1), 1 kΩ (1)
PD6/FD14pin 51Connected to: Signal 75% · not connected 25%
  • Series resistor on 75% · 20 kΩ (2), 2.2 kΩ (1)
  • Pull-up to VIO_EN on 50% · 10 kΩ (2)
  • Resistor to GND on 50% · 10 kΩ (2)
PD7/FD15pin 52Connected to: Not connected 100%
EPpin 57Connected to: GND 100%

23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Base board by GlasgowEmbedded, ECPBreaker by gregdavill, Tycho by greatscottgadgets and Base board by nanographs.

The CY7C68013A-56LTXC in open source designs

The gallery holds 8 open source boards using the CY7C68013A-56LTXC from 6 GitHub repositories; a typical one measures about 90.9 × 49 mm and carries around 141 components.

71% use four copper layers or more, and 63% carry an open source license.

The most starred is Base board by GlasgowEmbedded.

Microcontrollers on boards using the CY7C68013A-56LTXC

What boards using the CY7C68013A-56LTXC are built for

CY7C68013A-56LTXC: common questions

Where can I find a CY7C68013A-56LTXC reference design?

Each of the 8 boards on this page is a real design using the CY7C68013A-56LTXC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the CY7C68013A-56LTXC AVCC pin?

The AVCC pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the CY7C68013A-56LTXC.

How is the CY7C68013A-56LTXC XTALOUT pin connected?

The XTALOUT pin has a crystal on 4 of 5 designs, most often 24 MHz. Counted from the KiCad layouts of 5 open source designs using the CY7C68013A-56LTXC.

How is the CY7C68013A-56LTXC XTALIN pin connected?

The XTALIN pin has a crystal on 4 of 5 designs, most often 24 MHz. Counted from the KiCad layouts of 5 open source designs using the CY7C68013A-56LTXC.

What parts are used alongside the CY7C68013A-56LTXC?

The DAC081C081CIMK/NOPB, TPD3S014DBVR, TPS73101DBVR, APX811-40UG-7 and BL24C256A-SFRC appear in the most repositories here.

Which microcontrollers do boards using the CY7C68013A-56LTXC use?

Most are built on FPGA (3) and Microchip SAM (1).

How big is a typical board using the CY7C68013A-56LTXC?

The median is 90.9 × 49 mm, and 29% are two-layer designs.

What is the most popular open source board using the CY7C68013A-56LTXC?

By GitHub stars, Base board by GlasgowEmbedded, with 2,229 stars.

Can I simulate one of these boards using the CY7C68013A-56LTXC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part