Blinker

deveshrai·kicad-android·work/blinker/project/blinker.kicad_pcb

Blinker PCB layout, top view — open source RP2040/RP2350 board by deveshrai

About the Blinker PCB

Blinker is an open source RP2040/RP2350 PCB design by deveshrai, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 64 × 36 mm, with 10 components from 10 distinct parts.

Its main chip is the RP2350A, from the RP2040/RP2350 family. By type, the board carries 3 capacitors, 3 resistors, 1 IC, 1 battery holder, 1 switch and 1 diode.

From the project

KiCad Android: KiCad 10.99 (schematics, PCB layout, 3D viewer, Gerbers) running natively on Android tablets and foldables — wxWidgets on Qt 6, Vulkan canvas, OpenGL 3D via gl4es

A CR2032-powered 5 mm LED blinker: an ICM7555 (CMOS 555, runs from 2 V) in astable mode, R1 1k, R2 47k, C1 10 µF (≈1.5 Hz), C2 10 nF on CV, C3 100 nF decoupling, R3 220 Ω and a red LED, an on/off slide switch, all through-hole.

Made on a Galaxy Tab (2026-11-06) to test the whole flow in the Android app: New Project (Android save picker) → schematic (generated by gensch.py, ERC 0) → Update PCB from Schematic → placement (placepcb.py) → Freerouting (Specctra export/import) → zone fill, DRC (0 violations, schematic parity OK) → 3D viewer with STEP models.

Main components on the Blinker

Blinker bill of materials (BOM)

10 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2350A
ICM7555
Raspberry Pi
U1
1
CR2032
BT1
1
TL3342F160QG
ON/OFF
E-Switch
SW1
1
APT1608EC
Red 5mm
Kingbright
D1
1
CL10A105KB8NNNC
10u
Samsung
C1
1
CL10A105KB8NNNC
10n
Samsung
C2
1
CL21A106KAYNNNE
100n
Samsung
C3
1
RC0603FR-075K1L
1k
Yageo
R1
1
RC0603FR-075K1L
47k
Yageo
R2
1
RC0603FR-0727RL
220
Yageo
R3

Blinker design files

The KiCad project lives in the deveshrai/kicad-android repository on GitHub; these links point at the commit this page was built from.

Blinker: common questions

What microcontroller does the Blinker use?

The Blinker is built around the RP2350A, from the RP2040/RP2350 family.

How big is the Blinker PCB?

The Blinker measures 64 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Blinker?

10 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Blinker design files?

From the deveshrai/kicad-android repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Blinker design in my own project?

Yes, under the terms of its GPL-3.0 license, which deveshrai chose for the repository.

Can I test firmware for the Blinker without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in kicad-android

Similar boards