Esp32s3-uno
deveshrai·kicad-android·work/esp32s3-uno/project/esp32s3-uno.kicad_pcb
About the Esp32s3-uno PCB
Esp32s3-uno is an open source RP2040/RP2350 PCB design by deveshrai, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 27 components from 24 distinct parts.
Its main chip is the RP2350A, from the RP2040/RP2350 family. Other key parts include the AP2112K-3.3TRG1 and W25Q128JVSIQ. By type, the board carries 7 connectors, 6 capacitors, 4 diodes, 4 resistors, 3 ICs and 2 switches.
From the project
KiCad Android: KiCad 10.99 (schematics, PCB layout, 3D viewer, Gerbers) running natively on Android tablets and foldables — wxWidgets on Qt 6, Vulkan canvas, OpenGL 3D via gl4es
An Arduino Uno-format board for the ESP32-S3-WROOM-1. Claude Code built it on the tablet, start to finish, through KiCad Android's built-in MCP server. Every design change went through MCP (kicadapi and the pcb_*` tools); adb was used only for screen recording and screenshots.
- Shield headers J1-J4, mounting holes and outline sit where an Uno has them (from KiCad's Arduino Uno template). - Pin map: - A0-A3 are IO1-IO4. - SDA/SCL are IO8/IO9, on both J3 and J2. - D2-D13 are IO17, IO16, IO15, IO7, IO6, IO5, IO21, IO14, IO10, IO11, IO13 and IO12. - TX/RX go to the module's UART0. - J5 (2x8)…
Main components on the Esp32s3-uno
Esp32s3-uno bill of materials (BOM)
27 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2350A ESP32-S3-WROOM-1 Raspberry Pi | ESP32-S3-WROOM-1 | U1 |
| 1 | AP2112K-3.3TRG1 AMS1117-5.0 Diodes Inc | SOT-223-3_TabPin2 | U2 |
| 1 | W25Q128JVSIQ AMS1117-3.3 Winbond | SOT-223-3_TabPin2 | U3 |
| 1 | TYPE-C-31-M-12 Power HRO | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | PRPC020DAAN-RC Digital/PWM Sullins | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | PPTC141LFBN-RC Analog Sullins | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Extra IO | PinHeader_2x08_P2.54mm_Vertical | J5 |
| 1 | USB-B | USB_B_OST_USB-B1HSxx_Horizontal | J6 |
| 1 | 7-12V | BarrelJack_Horizontal | J7 |
| 1 | 500mA | Fuse_1206_3216Metric | F1 |
| 1 | TL3342F160QG RESET E-Switch | SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | TL3342F160QG BOOT E-Switch | SW_SPST_PTS645Sx43SMTR92 | SW2 |
| 1 | APT1608EC SS14 Kingbright | D_SMA | D1 |
| 1 | APT1608SGC SS14 Kingbright | D_SMA | D2 |
| 1 | APT1608QBC/D ON Kingbright | LED_0805_2012Metric | D3 |
| 1 | L | LED_0805_2012Metric | D4 |
| 2 | CL10A105KB8NNNC 10u Samsung | C_0805_2012Metric | C1, C2 |
| 1 | CL21A106KAYNNNE 22u Samsung | C_0805_2012Metric | C3 |
| 1 | CL10B104KB8NNNC 100n Samsung | C_0805_2012Metric | C4 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CL10B104KB8NNNC 10u Samsung | C_0805_2012Metric | C5 |
| 1 | CL10B104KB8NNNC 1u Samsung | C_0805_2012Metric | C6 |
| 2 | RC0603FR-075K1L 10k Yageo | R_0805_2012Metric | R1, R2 |
| 2 | RC0603FR-0727RL 1k Yageo | R_0805_2012Metric | R3, R4 |
Esp32s3-uno design files
The KiCad project lives in the deveshrai/kicad-android repository on GitHub; these links point at the commit this page was built from.
Esp32s3-uno: common questions
What microcontroller does the Esp32s3-uno use?
The Esp32s3-uno is built around the RP2350A, from the RP2040/RP2350 family.
How big is the Esp32s3-uno PCB?
The Esp32s3-uno measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32s3-uno?
27 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp32s3-uno design files?
From the deveshrai/kicad-android repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp32s3-uno design in my own project?
Yes, under the terms of its GPL-3.0 license, which deveshrai chose for the repository.
Can I test firmware for the Esp32s3-uno without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in kicad-android
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k