Routed1
deveshrai·kicad-android·work/rp2350/routed1.kicad_pcb
About the Routed1 PCB
Routed1 is an open source RP2040/RP2350 PCB design by deveshrai, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 95 × 65 mm, with 48 components from 27 distinct parts.
Its main chip is the RP2350A, from the RP2040/RP2350 family. Other key parts include the AP2112K-3.3TRG1 and W25Q128JVSIQ. By type, the board carries 21 capacitors, 11 resistors, 5 switches, 3 ICs, 3 connectors and 3 diodes.
It belongs with the wearables designs in this gallery.
From the project
KiCad Android: KiCad 10.99 (schematics, PCB layout, 3D viewer, Gerbers) running natively on Android tablets and foldables — wxWidgets on Qt 6, Vulkan canvas, OpenGL 3D via gl4es
The real KiCad 10.99 EDA suite, running natively on Android tablets and foldables.
Schematics, PCB layout with the interactive router, 3D viewer and Gerber output, built from upstream KiCad sources.
- Full desktop KiCad, not a viewer. It includes the project manager, schematic editor, PCB editor and push-and-shove router, footprint and symbol editors, Gerber viewer, calculator and kicad-cli. - GPU canvas. It runs on KiCad's Vulkan backend, with pointer motion coalesced so the interactive router keeps up. - Two built-in autorouters. Route > Autoroute runs KiCadRoutingTools (Andy Haas's…

Main components on the Routed1
Routed1 bill of materials (BOM)
48 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2350A Raspberry Pi | QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U1 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 Diodes Inc | SOT-23-5 | U2 |
| 1 | W25Q128JVSIQ W25Q128JVS Winbond | SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 1 | ABM8-272-T3 12MHz Abracon | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C-31-M-12 USB_C HRO | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | PRPC020DAAN-RC IO Sullins | PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | PPTC141LFBN-RC ILI9341_SPI Sullins | PinSocket_1x14_P2.54mm_Vertical | J3 |
| 1 | TL3342F160QG BTN1 E-Switch | SW_SPST_TL3342 | SW1 |
| 1 | TL3342F160QG BTN2 E-Switch | SW_SPST_TL3342 | SW2 |
| 1 | TL3342F160QG BTN3 E-Switch | SW_SPST_TL3342 | SW3 |
| 1 | TL3342F160QG BOOTSEL E-Switch | SW_SPST_TL3342 | SW4 |
| 1 | TL3342F160QG RESET E-Switch | SW_SPST_TL3342 | SW5 |
| 1 | APT1608EC Red Kingbright | LED_0603_1608Metric | D1 |
| 1 | APT1608SGC Green Kingbright | LED_0603_1608Metric | D2 |
| 1 | APT1608QBC/D Blue Kingbright | LED_0603_1608Metric | D3 |
| 1 | AOTA-B201610S3R3-101-T 3.3u Abracon | L_Abracon_AOTA-B201610S | L1 |
| 2 | CL10A105KB8NNNC 1u Samsung | C_0603_1608Metric | C1, C2 |
| 1 | CL21A106KAYNNNE 10u Samsung | C_0805_2012Metric | C3 |
| 13 | CL10B104KB8NNNC 100n Samsung | C_0603_1608Metric | C4, C5, C6, C7, C8, C9, C10, C11 +5 |
| 3 | CL21A475KAQNNNE 4.7u Samsung | C_0805_2012Metric | C13, C14, C15 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CL10C150JB8NNNC 15p Samsung | C_0603_1608Metric | C20, C21 |
| 2 | RC0603FR-075K1L 5.1k Yageo | R_0603_1608Metric | R1, R2 |
| 2 | RC0603FR-0727RL 27 Yageo | R_0603_1608Metric | R3, R4 |
| 1 | RC0603FR-0733RL 33 Yageo | R_0603_1608Metric | R5 |
| 2 | RC0603FR-071KL 1k Yageo | R_0603_1608Metric | R6, R7 |
| 1 | RC0603FR-0710KL 10k Yageo | R_0603_1608Metric | R8 |
| 3 | RC0603FR-07330RL 330 Yageo | R_0603_1608Metric | R9, R10, R11 |
Routed1 design files
The KiCad project lives in the deveshrai/kicad-android repository on GitHub; these links point at the commit this page was built from.
Routed1: common questions
What microcontroller does the Routed1 use?
The Routed1 is built around the RP2350A, from the RP2040/RP2350 family.
How big is the Routed1 PCB?
The Routed1 measures 95 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Routed1?
48 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Routed1 design files?
From the deveshrai/kicad-android repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Routed1 design in my own project?
Yes, under the terms of its GPL-3.0 license, which deveshrai chose for the repository.
Can I test firmware for the Routed1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in kicad-android
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k